Details

---

BUY G8N-1 12VDC https://www.utsource.net/itm/p/9237388.html

Parameter	Value	Description
Type	G8N-1 12VDC	Relay model
Coil Voltage	12V DC	Operating voltage for the relay coil
Coil Current	40mA	Current consumed by the coil
Contact Form	SPDT	Single Pole Double Throw
Contact Rating	5A at 250VAC	Maximum current and voltage rating for contacts
Insulation Voltage	1000VAC	Dielectric strength between contacts
Mechanical Life	10 million ops	Expected life cycle under no load
Electrical Life	100,000 ops	Expected life cycle under rated load
Operating Temp.	-40°C to 85°C	Temperature range for operation
Storage Temp.	-40°C to 85°C	Temperature range for storage
Weight	10g	Weight of the relay

Instructions:

1. Installation: Ensure the relay is installed in a well-ventilated area within the specified temperature range.
2. Wiring: Connect the coil terminals to a 12V DC power supply. Connect the common (COM), normally open (NO), and normally closed (NC) terminals according to your circuit requirements.
3. Operation: When 12V DC is applied to the coil, the relay will switch from the NC to the NO contact. When the voltage is removed, it returns to the NC position.
4. Maintenance: No regular maintenance is required. Avoid exposing the relay to excessive dust or moisture.
5. Safety: Do not exceed the maximum contact ratings to prevent damage or failure. Ensure proper handling to avoid electrical hazards.

(For reference only)