Details

---

BUY ACPL-K73L https://www.utsource.net/itm/p/9250669.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage	VIN	2.0	5.0	5.5	V	Supply voltage for the input side
Output Voltage	VOUT	-	3.3	5.0	V	Supply voltage for the output side
Isolation Voltage	VIOMAX	-	-	5000	V	Maximum isolation voltage
Input Current	IIN	-	1.0	10.0	mA	Supply current on the input side
Output Current	IOUT	-	1.0	10.0	mA	Supply current on the output side
Propagation Delay Time	tpd	0.8	1.2	1.6	渭s	Time delay from input to output
Rise Time	tr	-	0.2	0.4	渭s	Time for output to rise from 10% to 90%
Fall Time	tf	-	0.2	0.4	渭s	Time for output to fall from 90% to 10%
Operating Temperature	TA	-40	-	105	掳C	Ambient operating temperature range
Storage Temperature	TSTG	-55	-	150	掳C	Storage temperature range
Relative Humidity	RH	-	-	95	%	Operating relative humidity (non-condensing)
Maximum Junction Temperature	TJ	-	-	150	掳C	Maximum junction temperature

Instructions for Use

1. Supply Voltage:

   • Ensure that the input voltage (V_IN) is within the specified range of 2.0V to 5.5V.
   • The output voltage (V_OUT) should be set to either 3.3V or 5.0V as required.

2. Isolation:

   • The device provides a maximum isolation voltage of 5000V, which ensures safe operation in high-voltage environments.

3. Current Requirements:

   • The input current (I_IN) and output current (I_OUT) should not exceed 10.0mA to avoid damage to the device.

4. Timing Parameters:

   • The propagation delay time (t_pd) is typically between 0.8渭s and 1.6渭s, ensuring fast signal transmission.
   • The rise time (t_r) and fall time (t_f) are both typically around 0.2渭s to 0.4渭s, providing sharp transitions.

5. Temperature and Environmental Conditions:

   • Operate the device within the ambient temperature range of -40掳C to 105掳C.
   • Store the device in an environment with a temperature range of -55掳C to 150掳C.
   • Maintain a relative humidity of up to 95% (non-condensing) during operation.

6. Handling:

   • Handle the device with care to avoid static discharge, which can damage the internal components.
   • Follow standard ESD (Electrostatic Discharge) precautions when handling the device.

7. Mounting:

   • Ensure proper mounting to a suitable PCB (Printed Circuit Board) with appropriate soldering techniques.
   • Verify that the device is securely mounted to prevent mechanical stress.

By adhering to these parameters and instructions, you can ensure reliable and efficient operation of the ACPL-K73L optocoupler.

(For reference only)