Details

---

BUY HCPL-7611-500E https://www.utsource.net/itm/p/9255427.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Forward Voltage	V_F	IF = 20 mA		1.2	1.6	V
Input Reverse Voltage	V_R				5	V
Output Collector-Emitter Saturation Voltage	V_CE(SAT)	IC = 10 mA, IF = 20 mA		0.3	0.5	V
Output Collector Current	I_C	V_CE = 5V		5	7	mA
Propagation Delay Time	tPLH	IF = 20 mA, V_CC = 5V	0.4		1.2	渭s
Propagation Delay Time	tPHL	IF = 20 mA, V_CC = 5V	0.4		1.2	渭s
Common Mode Transient Immunity	CMTI	V_CM = 1 kV/渭s		25		kV/渭s

Instructions for HCPL-7611-500E

1. Power Supply:

   • Ensure the power supply voltage (V_CC) is within the specified range to avoid damage to the device.

2. Input Signal:

   • Apply a forward current (IF) of at least 20 mA to the input LED to ensure proper operation.
   • Do not exceed the maximum reverse voltage (V_R) on the input side.

3. Output Side:

   • The collector-emitter saturation voltage (V_CE(SAT)) should be monitored to ensure it remains within the specified limits under load conditions.
   • The output collector current (I_C) must not exceed the maximum rating to prevent overheating or damage.

4. Timing Considerations:

   • Account for the propagation delay times (tPLH and tPHL) in your circuit design to ensure accurate signal transmission.

5. Common Mode Transient Immunity:

   • To maintain reliable operation in noisy environments, consider the common mode transient immunity (CMTI) specification when designing the surrounding circuitry.

6. Handling Precautions:

   • Handle the device with care to avoid static damage.
   • Follow manufacturer guidelines for soldering temperature and duration to prevent thermal damage.

(For reference only)