Details

---

BUY TLP350/DIP https://www.utsource.net/itm/p/9262309.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Forward Voltage	VF	-	1.2	1.8	V	IF = 10 mA
Reverse Voltage	VRRM	-	-	5	V
Continuous Forward Current	IF	-	-	50	mA	TA = 25掳C
Peak Forward Current	IF(surge)	-	-	100	mA	tp = 1 s, TA = 25掳C
Output Current	IC	-	-	30	mA
Maximum Operating Temperature	TOP	-40	-	105	掳C
Storage Temperature	TSTG	-40	-	125	掳C
Isolation Voltage	VIORM	-	-	1500	V	1 minute, 50/60 Hz
CTR (Current Transfer Ratio)	CTR	200	500	-	%	IF = 5 mA, VCE = 5 V

Instructions for Use:

1. Handling and Storage:

   • Store the TLP350/DIP in a dry, cool place away from direct sunlight.
   • Handle with care to avoid static discharge and physical damage.

2. Mounting:

   • Ensure proper alignment and secure mounting to prevent mechanical stress.
   • Use a heat sink if operating at high currents or temperatures.

3. Electrical Connections:

   • Connect the input (anode and cathode) and output (collector and emitter) according to the pin configuration.
   • Ensure all connections are tight and secure to prevent intermittent operation.

4. Operating Conditions:

   • Do not exceed the maximum ratings listed in the table.
   • Operate within the specified temperature range to ensure reliable performance.

5. Testing:

   • Use a multimeter or appropriate test equipment to verify correct operation.
   • Test the device under typical operating conditions to ensure it meets the required specifications.

6. Safety Precautions:

   • Follow all safety guidelines when handling high voltages and currents.
   • Ensure proper insulation and grounding to prevent electrical shock.

7. Troubleshooting:

   • If the device fails to operate, check for correct polarity and connections.
   • Verify that the supply voltage and current are within the specified ranges.
   • Replace the device if it shows signs of damage or failure.

(For reference only)