Details

---

BUY SN74HC595ANSR HC595A SOP16-5.2MM https://www.utsource.net/itm/p/9274077.html

Parameter	Description	Min	Typ	Max	Unit
Supply Voltage (VCC)	Operating supply voltage	2.0	-	6.0	V
Output Current (IOH)	Output high-level current	-	-	-400	渭A
Output Current (IOL)	Output low-level current	-400	-	-	渭A
Input Current (IIH)	Input high-level current	-	-	1.0	渭A
Input Current (IIL)	Input low-level current	-1.0	-	-	渭A
Propagation Delay Time (tPLH)	Propagation delay time, low to high	-	50	100	ns
Propagation Delay Time (tPHL)	Propagation delay time, high to low	-	50	100	ns
Storage Temperature (Tstg)	Storage temperature range	-65	-	150	掳C
Operating Temperature (Topr)	Operating temperature range	-40	-	85	掳C

Instructions for SN74HC595ANSR HC595A SOP16-5.2MM

1. Power Supply:

   • Ensure that the supply voltage (VCC) is within the range of 2.0V to 6.0V.
   • Connect the ground (GND) pin to a stable reference ground.

2. Input Signals:

   • Apply the serial data input (DS) and shift register clock (SHCP) signals as required.
   • Use the storage register clock (STCP) to transfer data from the shift register to the storage register.
   • The master reset (MR) pin can be used to clear the shift register and storage register by pulling it low.

3. Output Configuration:

   • The output enable (OE) pin controls the output state of the storage register. Pulling OE low enables the outputs; pulling it high disables them.
   • The outputs (Q0 to Q7) will reflect the data stored in the storage register when enabled.

4. Timing Considerations:

   • Ensure that the propagation delay times (tPLH and tPHL) are considered in your design to avoid timing issues.
   • Use appropriate capacitors and resistors to filter noise and stabilize the power supply.

5. Thermal Management:

   • Operate the device within the specified operating temperature range (-40掳C to 85掳C).
   • Store the device within the storage temperature range (-65掳C to 150掳C).

6. Handling and Storage:

   • Handle the device with care to avoid static discharge damage.
   • Store the device in a dry, cool place to prevent moisture damage.

7. Schematic and Layout:

   • Refer to the datasheet for detailed pinout and recommended PCB layout guidelines.
   • Ensure proper decoupling capacitors are placed close to the VCC and GND pins to minimize noise and improve stability.

By following these instructions, you can ensure reliable operation of the SN74HC595ANSR HC595A SOP16-5.2MM in your application.

(For reference only)