Details

---

BUY CRO-2424S https://www.utsource.net/itm/p/9380655.html

Parameter	Value
Model Number	CRO-2424S
Type	Crystal Oscillator
Frequency	24 MHz
Frequency Tolerance	卤20 ppm
Stability	卤50 ppm over -20掳C to 70掳C
Supply Voltage	3.3V 卤 0.3V
Operating Current	8 mA max
Output Type	CMOS
Load Capacitance	12 pF
Rise/Fall Time	5 ns max
Operating Temperature	-20掳C to 70掳C
Storage Temperature	-40掳C to 85掳C
Package	SMD
Dimensions	5.0 x 3.2 mm

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage is within the range of 3.0V to 3.6V.
   • Use a stable power source to avoid fluctuations that could affect performance.

2. Installation:

   • Handle the oscillator with care to avoid mechanical stress.
   • Solder the oscillator to the PCB using a temperature-controlled soldering iron.
   • Ensure proper orientation and alignment with the PCB pads.

3. Load Capacitors:

   • Connect load capacitors of 12 pF between the oscillator output and ground to achieve optimal performance.
   • Place the capacitors as close as possible to the oscillator to minimize parasitic inductance.

4. Grounding:

   • Ensure a good ground connection to minimize noise and interference.
   • Use a solid ground plane on the PCB for better performance.

5. Testing:

   • After installation, test the oscillator to ensure it is operating at the correct frequency.
   • Use an oscilloscope or frequency counter to verify the output signal.

6. Environmental Considerations:

   • Store the oscillator in a dry environment to prevent moisture damage.
   • Avoid exposing the oscillator to extreme temperatures outside the specified operating range.

7. Handling:

   • Use anti-static precautions when handling the oscillator to prevent damage from electrostatic discharge (ESD).

8. Troubleshooting:

   • If the oscillator does not start, check the power supply, connections, and load capacitors.
   • Verify that the oscillator is not damaged and that the PCB traces are intact.

(For reference only)