Details

---

BUY MM74HC04N/MC74HC04N https://www.utsource.net/itm/p/9388957.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Low Voltage	VIL	VIN = 0V	-0.5		1.5	V
Input High Voltage	VIH	VIN = VCC	3.5		VCC+0.5	V
Output Low Voltage	VOL	IOH = 4mA	0		0.1	V
Output High Voltage	VOH	IOL = -4mA	VCC-0.1		VCC	V
Propagation Delay Time	tpLH, tpHL	VCC = 4.5V to 6V, TA = 25°C		9	22	ns
Power Supply Voltage	VCC		2		6	V
Operating Temperature	TJ		-40		85	°C

Instructions for MM74HC04N/MC74HC04N:

1. Power Supply: Ensure the power supply voltage (VCC) is within the specified range of 2V to 6V. The device is designed to operate reliably within this range.

2. Input Signals: Apply input signals that are either below the input low voltage (VIL) threshold or above the input high voltage (VIH) threshold for proper logic level recognition.

3. Output Loads: Connect loads ensuring the output current does not exceed the limits defined by the output high and low voltages (VOH, VOL). Typically, ensure not to exceed ±4mA for reliable operation.

4. Propagation Delay: Account for the propagation delay in timing-sensitive applications. The typical delay is 9ns at VCC between 4.5V and 6V, with a maximum of 22ns.

5. Temperature Considerations: Operate the device within the temperature range from -40°C to 85°C to ensure stable performance and reliability.

6. Handling Precautions: Handle the device carefully to avoid electrostatic discharge (ESD) damage. Use appropriate ESD protection measures during handling and installation.

7. Mounting: Ensure proper mounting on the PCB with adequate thermal management if operating near the upper temperature limit.

This table and these instructions provide essential information for the correct application and use of the MM74HC04N/MC74HC04N hex inverter.

(For reference only)