Details

---

BUY MAX4466EXK+ https://www.utsource.net/itm/p/9471059.html

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Supply Voltage	VCC	1.8	-	5.5	V	-
Quiescent Current	IQ	-	0.6	1.0	mA	-
Input Bias Current	IB	-	0.1	0.2	nA	-
Input Impedance	ZIN	-	10	-	kΩ	-
Output Short-Circuit Current	ISC	-	-	20	mA	-
Output Voltage Swing	VOUT	0.01	-	VCC-0.01	V	-
Slew Rate	SR	-	3	-	V/μs	-
Bandwidth (G = 1)	fBW	-	10	-	kHz	-
CMRR	CMRR	-	80	-	dB	-
PSRR	PSRR	-	80	-	dB	-
Operating Temperature	TOP	-40	-	85	°C	-
Storage Temperature	TSTG	-65	-	150	°C	-

Instructions for Using MAX4466EXK+

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 1.8V to 5.5V.
   • Connect the V_CC pin to the positive power supply and GND to the ground.

2. Input Connection:

   • Connect the input signal to the IN pin.
   • The input impedance is high, so it can be connected directly to the signal source without significant loading.

3. Output Connection:

   • The output signal is available at the OUT pin.
   • Ensure that the load connected to the output does not exceed the maximum short-circuit current of 20mA.

4. Biasing:

   • The input bias current is very low (0.1 to 0.2nA), so no additional biasing components are typically required.

5. Temperature Considerations:

   • The device operates reliably over a temperature range of -40°C to 85°C.
   • For storage, ensure the temperature does not exceed -65°C to 150°C.

6. PCB Layout:

   • Use a grounded copper pour around the device to minimize noise and improve thermal performance.
   • Keep the power and ground connections as short as possible to reduce noise and improve stability.

7. Handling:

   • Handle the device with care to avoid static damage.
   • Follow proper ESD (Electrostatic Discharge) precautions when handling and soldering the device.

8. Testing:

   • Before finalizing the design, test the device under various operating conditions to ensure it meets the required specifications.

9. Application Notes:

   • Refer to the datasheet and application notes for more detailed information on specific applications and advanced configurations.

(For reference only)