Details

---

BUY L9904-EN6 https://www.utsource.net/itm/p/9474557.html
Lead-free，Goods in stock

Parameter	Description	Value	Unit
Supply Voltage (Vcc)	Operating voltage range	4.5 to 36	V
Quiescent Current	Current consumed by the device when no load is applied	1.5	mA
Output Current (Iout)	Maximum continuous output current	2.5	A
Thermal Shutdown	Temperature at which the device will shut down to prevent damage	160	°C
Protection Features	Built-in protection mechanisms	Overcurrent, Overtemperature, Undervoltage Lockout	-
Operating Temperature Range	Temperature range over which the device can operate reliably	-40 to 150	°C
Storage Temperature Range	Temperature range for storing the device without damage	-65 to 150	°C
Package Type	Physical package of the device	SO8	-

Instructions for Use:

1. Power Supply Connection:

   • Connect the supply voltage (Vcc) to the designated pin.
   • Ensure the supply voltage is within the operating range of 4.5V to 36V.

2. Ground Connection:

   • Connect the ground (GND) pin to the system ground.

3. Output Connection:

   • Connect the load to the output (OUT) pin.
   • Ensure the load does not exceed the maximum continuous output current of 2.5A.

4. Thermal Management:

   • Ensure adequate heat dissipation to prevent the device from reaching the thermal shutdown temperature of 160°C.
   • Consider using a heatsink if necessary.

5. Protection Features:

   • The device includes overcurrent, overtemperature, and undervoltage lockout protections.
   • Do not bypass these features as they are designed to protect the device from damage.

6. Operating Environment:

   • Operate the device within the specified temperature range of -40°C to 150°C.
   • Store the device within the storage temperature range of -65°C to 150°C.

7. Package Handling:

   • Handle the SO8 package with care to avoid mechanical damage.
   • Follow standard ESD (Electrostatic Discharge) precautions during handling and installation.

8. Testing and Validation:

   • Test the device under typical operating conditions to ensure it meets the required performance specifications.
   • Validate the design with appropriate test equipment and procedures.

(For reference only)