Details

---

BUY OPA2134UA 2134UA https://www.utsource.net/itm/p/9475811.html

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	VCC	-	卤15	-	V
Supply Current (per Amp)	ICC	-	1.8	-	mA
Input Offset Voltage	VIO	-	0.5	-	mV
Input Bias Current	IB	-	2	-	nA
Input Offset Current	IOS	-	0.5	-	nA
Slew Rate	SR	-	13	-	V/渭s
Bandwidth (-3 dB)	f-3dB	-	20	-	MHz
Output Voltage Swing	VOUT	-	卤13	-	V
Common-Mode Rejection Ratio	CMRR	-	100	-	dB
Power Supply Rejection Ratio	PSRR	-	100	-	dB

Instructions for Use:

1. Power Supply:

   • The OPA2134UA can operate with a single supply or dual supplies.
   • For dual supplies, use 卤15V for maximum performance.
   • For single supply, use a voltage between 3V and 36V.

2. Input Signal:

   • Ensure the input signal is within the common-mode input range, which is typically from -0.5V to V_CC + 0.5V.
   • Avoid input signals that exceed the power supply rails to prevent damage.

3. Output Load:

   • The output can drive loads down to 600惟.
   • For optimal performance, keep the load impedance above 2k惟.

4. Stability:

   • The OPA2134UA is unity-gain stable.
   • Use compensation capacitors if necessary to ensure stability in high-gain applications.

5. Temperature Range:

   • The device is specified for operation over the industrial temperature range (-40掳C to +85掳C).

6. Handling:

   • Handle the device with care to avoid electrostatic discharge (ESD).
   • Use proper ESD protection equipment when handling the device.

7. Mounting:

   • Ensure proper heat dissipation by mounting the device on a PCB with adequate copper area.
   • Follow recommended PCB layout guidelines to minimize noise and interference.

8. Testing:

   • Before finalizing the design, test the circuit under various operating conditions to ensure reliability and performance.

9. Storage:

   • Store the device in a dry, cool place to prevent moisture damage.
   • Use desiccant packets if storing for extended periods.

By following these instructions, you can ensure optimal performance and reliability of the OPA2134UA operational amplifier.

(For reference only)