Details
BUY 16F88-I/P https://www.utsource.net/itm/p/9481285.html
| Parameter | Description |
|---|---|
| Package Type | PDIP (Plastic Dual Inline Package) |
| Number of Pins | 18 |
| Operating Voltage (Vdd) | 2.0V to 5.5V |
| Operating Temperature | -40°C to +85°C |
| Flash Program Memory | 8K x 14 |
| EEPROM Data Memory | 256 bytes |
| RAM Data Memory | 368 bytes |
| Oscillator Types | LP, XT, HS, EC, INTRC |
| Peripheral Modules | ADC, Comparator, Timer0, Timer1, Timer2, CCP1, MSSP, UART |
| Programmable Logic Array (PLA) | Configurable logic for custom I/O functions |
| Watchdog Timer (WDT) | Yes |
| Brown-out Reset (BOR) | Yes |
| Power-saving Modes | Sleep, Idle |
| In-Circuit Serial Programming (ICSP) | Supported |
Instructions for Use:
Power Supply: Ensure the operating voltage is within the specified range (2.0V to 5.5V). Connect Vdd to the positive supply and Vss to ground.
Clock Configuration: Choose an appropriate oscillator type based on your application requirements (LP, XT, HS, EC, or internal RC).
Programming: Use ICSP (In-Circuit Serial Programming) for programming the device. Connect the programmer to the designated pins (MCLR, PGD, PGC).
Memory Initialization: Initialize EEPROM and RAM as per your application needs. Use MPLAB IDE or another compatible software for code development.
Peripheral Setup: Configure peripheral modules such as ADC, timers, and communication interfaces (UART, SPI, I2C) according to your specific application.
Power Management: Implement power-saving modes like Sleep and Idle to optimize power consumption.
Reset Conditions: Utilize Watchdog Timer and Brown-out Reset features to ensure reliable operation under varying conditions.
Testing: After setup, thoroughly test the microcontroller in the target environment to ensure all functionalities are working as expected.
View more about 16F88-I/P on main site