Details

---

BUY 2SK3131 K3131 50A 500V TO3PL TOSHIBA https://www.utsource.net/itm/p/9481428.html

Parameter	Symbol	Value	Unit
Collector-Emitter Voltage	V(BR)CEO	500	V
Collector-Base Voltage	V(BR)CBO	500	V
Emitter-Base Voltage	V(BR)EBO	5	V
Continuous Collector Current	Ic	50	A
Power Dissipation	Ptot	125	W
Junction Temperature	Tj	-55 to 150	°C
Storage Temperature	Tstg	-55 to 150	°C
Transition Frequency	ft	8	MHz

Instructions for Use:

1. Handling Precautions:

   • Avoid exceeding the maximum ratings listed in the parameter table.
   • Ensure proper heat sinking to manage junction temperature, especially under high current or power dissipation conditions.

2. Mounting:

   • The device is housed in a TO3PL package which requires careful mounting to ensure good thermal and electrical connections.
   • Use appropriate torque when tightening the mounting hardware to prevent damage to the component.

3. Soldering:

   • Soldering should be done at temperatures not exceeding 260°C for no more than 10 seconds per operation.
   • Allow adequate cooling time between soldering operations.

4. Electrical Connections:

   • Ensure all connections are secure and insulated as necessary to prevent short circuits.
   • Pay attention to polarity; incorrect polarity can lead to immediate failure of the device.

5. Testing:

   • Before applying full operating voltages and currents, test the device with lower values to ensure it operates within expected parameters.
   • Regularly monitor the temperature and performance characteristics during operation.

6. Storage:

   • Store in a dry, cool place away from direct sunlight and corrosive substances.
   • Handle with care to avoid mechanical damage or electrostatic discharge (ESD).

(For reference only)