Details

---

BUY BM08B-SRSS-TB(LF)(SN) https://www.utsource.net/itm/p/9482129.html

Parameter	Description	Value
Part Number	Full part number	BM08B-SRSS-TB(LF)(SN)
Manufacturer	Company that produces the component	Panasonic
Type	Component category	Surface Mount Relay
Coil Voltage	Voltage required to activate the relay	5V DC
Coil Current	Current drawn by the coil when activated	32mA
Contact Form	Configuration of the relay contacts	SPDT (Single Pole Double Throw)
Contact Rating	Maximum current and voltage the contacts can handle	5A, 125V AC / 30V DC
Insulation Resistance	Resistance between the coil and contacts	100M惟 min at 250V DC
Dielectric Strength	Voltage the insulation can withstand without breakdown	1500V AC for 1 minute
Operating Temperature	Range of temperatures the relay can operate in	-40掳C to +85掳C
Storage Temperature	Range of temperatures the relay can be stored in	-40掳C to +85掳C
Mechanical Life	Number of operations before failure	10 million cycles
Electrical Life	Number of operations under rated load before failure	100,000 cycles
Terminal Type	Type of terminals used for connections	Soldering Pads
Package Size	Dimensions of the component	8.0 x 8.0 x 6.2 mm
Weight	Mass of the component	0.7g

Instructions:

1. Handling:

   • Handle with care to avoid damage to the component.
   • Use appropriate ESD (Electrostatic Discharge) precautions to prevent damage.

2. Soldering:

   • Preheat the PCB to 100-120掳C before soldering.
   • Soldering temperature should not exceed 260掳C.
   • Soldering time should not exceed 10 seconds per pad.

3. Mounting:

   • Ensure the relay is securely mounted on the PCB.
   • Avoid applying excessive force or torque during installation.

4. Testing:

   • Test the relay after installation to ensure proper operation.
   • Verify the contact resistance and insulation resistance meet the specified values.

5. Operation:

   • Apply the correct coil voltage to activate the relay.
   • Do not exceed the maximum contact ratings to prevent damage or failure.
   • Regularly inspect the relay for signs of wear or damage.

6. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Keep the relay in its original packaging until ready for use.

(For reference only)