Details

---

BUY IRFB3607PBF N-CHANNEL 75V 80A (TC) 140W (TC) THROUGH HOLE TO-220AB IRFB3607 https://www.utsource.net/itm/p/9500554.html

Parameter	Value	Unit
Type	N-Channel	-
Maximum Drain Voltage	75	V
Continuous Drain Current	80	A
Power Dissipation (TC)	140	W
Package Type	TO-220AB	-
Mounting Type	Through Hole	-

Instructions for IRFB3607PBF:

1. Handling Precautions:

   • Ensure proper ESD protection when handling the device.
   • Avoid excessive heat during soldering to prevent damage.

2. Mounting:

   • Use a heatsink if operating near maximum power dissipation.
   • Ensure good thermal contact between the device and heatsink.

3. Soldering:

   • Solder within the recommended temperature and time limits to avoid damaging the component.
   • Recommended soldering temperature: 260°C for 10 seconds.

4. Electrical Connections:

   • Connect the source, gate, and drain terminals correctly as per the circuit design.
   • Ensure the gate drive voltage is within the specified limits to avoid overdriving the MOSFET.

5. Storage:

   • Store in a dry environment to prevent moisture damage.
   • Keep away from static sources to avoid ESD damage.

(For reference only)