Details

---

BUY TLP131GB-TPL.F https://www.utsource.net/itm/p/9506878.html

Parameter	Symbol	Min	Typ	Max	Unit	Condition
Forward Voltage	VF	1.0	1.2	1.4	V	IF = 20 mA
Reverse Breakdown Voltage	VBR	-5	-	-50	V	IR = 1 μA
Forward Current	IF	-	20	50	mA	VR = 0 V
Peak Forward Current	IFP	-	-	100	mA	Pulse Width ≤ 1 ms
Reverse Current	IR	-	-	1	μA	VR = -50 V
Output Collector-Emitter Saturation Voltage	VCE(sat)	0.1	0.2	0.3	V	IC = 5 mA, IF = 20 mA
Output Collector Current	IC	-	5	10	mA	IF = 20 mA
Output Leakage Current	IOL	-	-	10	nA	VCE = 5 V, IF = 0
Isolation Voltage	VIORM	-	-	5000	Vrms	Test Condition: 1 minute
Operating Temperature	TOPR	-40	-	105	°C	-
Storage Temperature	TSTG	-40	-	125	°C	-

Instructions for Use:

1. Forward Current (IF):

   • Ensure that the forward current does not exceed 50 mA continuously to avoid damaging the device.
   • For pulse applications, the peak forward current can be up to 100 mA with a pulse width of 1 ms or less.

2. Reverse Voltage (VR):

   • The reverse voltage should not exceed 50 V to prevent breakdown.
   • Ensure that the reverse leakage current (IR) is kept below 1 μA at the maximum reverse voltage.

3. Output Collector-Emitter Saturation Voltage (VCE(sat)):

   • The output collector-emitter saturation voltage should be monitored to ensure it remains within the specified range to maintain optimal performance.

4. Output Collector Current (IC):

   • The output collector current should not exceed 10 mA to prevent overheating and potential damage to the device.

5. Isolation Voltage (VIORM):

   • The isolation voltage is rated at 5000 Vrms for 1 minute. Ensure that this rating is not exceeded during operation to maintain safety and reliability.

6. Temperature Considerations:

   • The operating temperature range is from -40°C to 105°C. Ensure that the device is used within this range to avoid thermal stress.
   • The storage temperature range is from -40°C to 125°C. Store the device in a suitable environment to prevent damage.

7. Handling and Mounting:

   • Handle the device with care to avoid mechanical stress and electrostatic discharge (ESD).
   • Follow proper soldering procedures to ensure reliable connections without causing thermal damage.

8. Testing:

   • Perform regular testing to ensure that all parameters remain within the specified limits.
   • Use appropriate test equipment and methods to avoid introducing errors or damage during testing.

9. Compliance:

   • Ensure that the device complies with all relevant safety and regulatory standards for your application.

By following these guidelines, you can ensure the reliable and safe operation of the TLP131GB-TPL.F optocoupler.

(For reference only)