Details

---

BUY TLP120GB-TPL.F https://www.utsource.net/itm/p/9509081.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Forward Voltage	VF	-	1.35	1.65	V	IF = 20 mA
Reverse Voltage	VR	-	-	5	V
Continuous Forward Current	IF	-	-	50	mA	Ta = 25掳C
Peak Forward Current	IF(surge)	-	-	200	mA	tp = 1 s, Ta = 25掳C
Output Leakage Current	IOL	-	1	10	渭A	VR = 5 V, Ta = 25掳C
Isolation Voltage	VIORM	-	-	2500	Vrms	1 minute, 50/60 Hz
Operating Temperature	TA	-40	-	85	掳C
Storage Temperature	TSTG	-40	-	100	掳C

Instructions for Use

1. Mounting:

   • Ensure the device is mounted on a PCB with proper soldering techniques.
   • Avoid excessive thermal stress during soldering.

2. Electrical Connections:

   • Connect the anode (A) to the positive supply and the cathode (K) to the ground.
   • The output side should be connected to the load circuit.

3. Operating Conditions:

   • Do not exceed the maximum ratings specified in the table.
   • Ensure the operating temperature is within the specified range to avoid damage.

4. Handling:

   • Handle the device with care to avoid mechanical damage.
   • Use appropriate ESD protection to prevent damage from static electricity.

5. Testing:

   • Before final assembly, test the device under typical operating conditions to ensure it meets the required specifications.

6. Storage:

   • Store the device in a dry, cool place away from direct sunlight and sources of heat.

7. Compliance:

   • Ensure that the device complies with all relevant safety and regulatory standards for your application.

(For reference only)