Details

---

BUY PD69104B1FILQ https://www.utsource.net/itm/p/9513929.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD	2.7		5.5	V	Operating supply voltage range
Supply Current	IDD		100		渭A	Quiescent current
Output Current	IOUT		300		mA	Maximum output current
Shutdown Current	ISD		1		渭A	Current in shutdown mode
Enable Input High Level	VENH	1.8		5.5	V	Enable pin high level input voltage
Enable Input Low Level	VENL	0		0.8	V	Enable pin low level input voltage
Output Voltage Drop	VDROPOUT		0.2		V	Voltage drop at max output current
Operating Temperature	TOPR	-40		85	掳C	Operating temperature range
Storage Temperature	TSTG	-65		150	掳C	Storage temperature range

Instructions for PD69104B1FILQ:

1. Power Supply Connection:

   • Connect the supply voltage (VDD) between 2.7V and 5.5V to the VDD pin.
   • Ensure a stable power supply to avoid fluctuations that can affect performance.

2. Enable Control:

   • Apply a voltage greater than 1.8V to the enable pin (VEN) to activate the device.
   • Set the enable pin below 0.8V to put the device into shutdown mode, reducing current consumption.

3. Output Load Management:

   • The device can deliver up to 300mA of output current. Ensure the load does not exceed this limit to prevent damage.
   • Be aware of the voltage drop across the output when operating near the maximum current.

4. Thermal Considerations:

   • Operate within the specified temperature range (-40掳C to 85掳C) to ensure reliable operation.
   • For extended storage, keep within the storage temperature range (-65掳C to 150掳C).

5. Current Consumption:

   • Monitor quiescent current (IDD) and shutdown current (ISD) to optimize power usage in battery-operated applications.

6. Handling Precautions:

   • Follow standard ESD handling procedures to avoid damaging the device.
   • Ensure proper heat sinking if operating under heavy loads or high ambient temperatures.

(For reference only)