Details

---

BUY HCPL-3100-500E https://www.utsource.net/itm/p/9517152.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Current	IF(ON)	-	1.6	20	mA	Forward current required to turn on the optocoupler.
Input Voltage	VF	1.1	1.4	1.7	V	Forward voltage drop across the LED when IF = 20 mA.
Output Collector-Emitter	VCE(OFF)	-	0.1	0.5	V	Maximum collector-emitter voltage when the output is off (IF = 0).
Output Collector Current	IC	-	-	15	mA	Maximum collector current when the output is on.
Isolation Voltage	VIORM	-	-	5000	V	Maximum repetitive peak isolation voltage.
Propagation Delay Time	tPLH	2	5	8	渭s	Time delay from input rising edge to output rising edge.
Propagation Delay Time	tPHL	2	5	8	渭s	Time delay from input falling edge to output falling edge.
Storage Temperature	Tstg	-40	-	105	掳C	Temperature range for storage and operation.
Operating Temperature	Topr	-40	-	105	掳C	Temperature range for continuous operation.

Instructions for Use:

1. Power Supply:

   • Ensure the input voltage (VF) is within the specified range to avoid damaging the LED.
   • The output side should be powered with a voltage that does not exceed the maximum collector-emitter voltage (VCE).

2. Current Limiting:

   • Use a current-limiting resistor on the input side to ensure the forward current (IF) is within the recommended range (1.6 to 20 mA).

3. Isolation:

   • The HCPL-3100-500E provides galvanic isolation up to 5000 V. Ensure that the isolation barrier is not exceeded to maintain safety and performance.

4. Signal Timing:

   • Consider the propagation delay times (tPLH and tPHL) when designing circuits that require precise timing.

5. Temperature Considerations:

   • Operate the device within the specified temperature ranges to ensure reliable performance and longevity.

6. Mounting:

   • Follow proper soldering techniques and ensure good thermal management, especially if operating at high temperatures or currents.

7. Storage:

   • Store the device in a dry, cool place to prevent damage from moisture or extreme temperatures.

8. Handling:

   • Handle the device with care to avoid static discharge, which can damage sensitive components. Use ESD protection where necessary.

(For reference only)