Details

---

BUY MX429ALH https://www.utsource.net/itm/p/9521036.html

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	Vcc	2.7	-	5.5	V
Operating Temperature	Toper	-40	-	85	°C
Storage Temperature	Tstg	-65	-	150	°C
Input Voltage Range	Vin	0	-	Vcc	V
Output Current	Iout	-	50	100	mA
Quiescent Current	Iq	-	10	20	μA
Output Voltage	Vout	-	Vcc-1.2	-	V
Rise Time	tr	-	5	10	ns
Fall Time	tf	-	5	10	ns

Instructions for Using the MX429ALH

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the range of 2.7V to 5.5V.
   • Connect the power supply to the Vcc pin and ground (GND) pin.

2. Input Signal:

   • The input voltage (Vin) should be within the range of 0V to Vcc.
   • Connect the input signal to the input pin (IN).

3. Output Signal:

   • The output voltage (Vout) will be Vcc minus a drop of approximately 1.2V.
   • Connect the load to the output pin (OUT).

4. Temperature Considerations:

   • Operate the device within the temperature range of -40°C to 85°C.
   • Store the device within the temperature range of -65°C to 150°C.

5. Current Handling:

   • The device can provide up to 100mA of output current, with a typical value of 50mA.
   • Ensure the load does not exceed the maximum output current to avoid damage.

6. Quiescent Current:

   • The quiescent current (Iq) is typically 10μA and should not exceed 20μA.

7. Signal Timing:

   • The rise time (tr) and fall time (tf) are typically 5ns, with a maximum of 10ns.
   • Ensure that the input signal transitions are within these timing parameters to maintain proper operation.

8. Handling Precautions:

   • Handle the device with care to avoid static discharge, which can damage the internal components.
   • Use appropriate ESD protection measures when handling the device.

9. Mounting:

   • Follow the recommended PCB layout guidelines to ensure optimal performance and reliability.
   • Ensure proper thermal management if operating at high temperatures or high current levels.

(For reference only)