Details

---

BUY PC3H3DJ0000F https://www.utsource.net/itm/p/9524079.html

Parameter	Description
Part Number	PC3H3DJ0000F
Type	DDR3 SDRAM
Capacity	4 GB
Module Type	DIMM
Memory Speed	1600 MT/s (PC3-12800)
Voltage	1.5V
CAS Latency (CL)	CL11
RAS# to CAS# Delay	TRCD 11
Row Precharge Time	TRP 11
Row Active Time	TRAS 33
Cycle Time	TCKE 10
Rank	Single Rank
ECC	Non-ECC
Operating Temperature	0°C to 85°C
RoHS Compliance	Yes

Instructions for Use

1. Installation: Ensure the system is powered off before installing the module. Align the notch on the module with the slot on the motherboard and press down firmly until the clips on both sides snap into place.
2. Compatibility Check: Verify that your motherboard supports DDR3 memory modules and specifically the speed and voltage requirements of this module.
3. BIOS Settings: After installation, enter the BIOS setup during boot-up to ensure the system recognizes the new memory and adjusts settings as necessary (e.g., XMP profiles for optimized performance).
4. Cooling Considerations: Ensure adequate airflow around the memory slots to prevent overheating, especially in high-performance systems.
5. Warranty: Refer to the manufacturer’s warranty policy for any issues or defects found after installation.

For detailed specifications and additional information, refer to the datasheet provided by the manufacturer.

(For reference only)