Details

---

BUY TLP521-1 DIP4 P521-1 https://www.utsource.net/itm/p/9529610.html

Parameter	Symbol	Min	Typ	Max	Unit	Condition
Forward Voltage	VF	-	1.2	1.6	V	IF = 10 mA
Reverse Voltage	VRRM	-	-	5	V
Continuous Forward Current	IF	-	-	30	mA
Peak Forward Current	IF(surge)	-	-	100	mA	t = 1 s, duty cycle 2%
Collector-Emitter Voltage	VCEO	-	-	30	V	IC = 5 mA, TA = 25掳C
Collector Current	IC	-	-	5	mA	VCE = 5 V
Output Leakage Current	ICEO	-	100	500	nA	VCE = 30 V, IF = 0 mA
Isolation Voltage	VIORM	-	-	1500	VRMS	1 min, 50/60 Hz
Operating Temperature	TOP	-40	-	85	掳C
Storage Temperature	TSTG	-40	-	125	掳C

Instructions:

1. Handling Precautions:

   • Handle with care to avoid mechanical damage.
   • Use appropriate ESD (Electrostatic Discharge) protection when handling.

2. Mounting:

   • Ensure proper alignment of the component during soldering.
   • Avoid excessive heat during soldering; recommended temperature is 260掳C for 10 seconds.

3. Operating Conditions:

   • Do not exceed the maximum ratings listed in the table.
   • Ensure the operating temperature is within the specified range.

4. Testing:

   • Test the device under controlled conditions to ensure it meets the required specifications.
   • Use a multimeter or appropriate testing equipment to verify parameters such as forward voltage and leakage current.

5. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Follow recommended storage conditions to maintain component integrity.

6. Applications:

   • Suitable for general-purpose signal isolation and switching applications.
   • Commonly used in industrial control systems, communication interfaces, and power supply circuits.

(For reference only)