Details

---

BUY Three-phase rectifier bridge pile MDS100-12 https://www.utsource.net/itm/p/9530243.html

Parameter	Specification
Model	MDS100-12
Input Voltage	380V AC ±15% (Three-phase)
Output Voltage	0-12V DC
Output Current	0-100A
Efficiency	≥92%
Cooling Method	Forced Air Cooling
Protection Features	Overvoltage, Overcurrent, Short Circuit, Overheat
Operating Temperature	-20°C to +50°C
Storage Temperature	-40°C to +70°C
Humidity	5% to 95% RH (Non-condensing)
Insulation Resistance	>10MΩ at 500V DC
Dielectric Strength	2500V AC for 1 minute
Dimensions (LxWxH)	450mm x 300mm x 200mm
Weight	25kg

Instructions

1. Installation:

   • Ensure the installation location is well-ventilated and free from dust and moisture.
   • Mount the rectifier on a stable surface with sufficient space around it for cooling.

2. Connection:

   • Connect the three-phase input terminals (L1, L2, L3) to the power supply.
   • Connect the neutral (N) and ground (GND) terminals as required.
   • Connect the positive (+) and negative (-) output terminals to the load.

3. Operation:

   • Turn on the power supply.
   • Adjust the output voltage and current using the control panel or external control circuit.
   • Monitor the rectifier during operation to ensure it is functioning correctly.

4. Maintenance:

   • Regularly inspect the connections for tightness and signs of wear.
   • Clean the air vents and filters to prevent overheating.
   • Check the cooling fan for proper operation.

5. Safety Precautions:

   • Do not operate the rectifier without proper ventilation.
   • Disconnect the power supply before performing any maintenance or adjustments.
   • Use appropriate personal protective equipment (PPE) when handling high-voltage components.
   • Follow all local electrical codes and regulations.

(For reference only)