Details

---

BUY ADG1334BRSZ IC SWITCH QUAD SPDT 20SSOP https://www.utsource.net/itm/p/9748765.html

Parameter	Description	Min	Typ	Max	Unit
Supply Voltage (VDD)	Operating supply voltage range	1.8	-	5.5	V
Supply Current (IDD)	Quiescent current per channel	-	1	-	渭A
Channel Resistance (RON)	On-state resistance	-	1.5	-	惟
Channel Capacitance (CIN)	Input capacitance	-	4.5	-	pF
Switching Time (tsw)	Time to switch from one channel to another	-	10	-	ns
Signal Bandwidth (fBW)	Maximum signal bandwidth	-	100	-	MHz
Isolation (ISO)	Channel-to-channel isolation at 1 MHz	-	70	-	dB
Breakdown Voltage (VBR)	Maximum voltage that can be applied without damage	-	5.5	-	V
Operating Temperature (TA)	Ambient operating temperature range	-40	-	85	掳C
Storage Temperature (TSTG)	Temperature range for storage	-65	-	150	掳C

Instructions for Using ADG1334BRSZ

1. Power Supply:

   • Ensure the supply voltage (V_DD) is within the specified range of 1.8V to 5.5V.
   • Connect the ground (GND) pin to the system ground.

2. Signal Input and Output:

   • Connect the input signals to the appropriate input pins (IN1, IN2, IN3, IN4).
   • The output signals will be available on the corresponding output pins (OUT1, OUT2, OUT3, OUT4) based on the control signals.

3. Control Signals:

   • Use the control signals (S1, S2, S3, S4) to select the desired channel. Each control signal should be set to either high or low to switch between the two positions of the SPDT switch.
   • Refer to the truth table provided in the datasheet for the specific control signal combinations.

4. Handling and Storage:

   • Handle the IC with care to avoid static discharge, which can damage the device.
   • Store the IC in a dry and cool environment within the specified storage temperature range.

5. Layout and PCB Design:

   • Ensure proper grounding and decoupling capacitors are placed close to the power supply pins to minimize noise.
   • Follow the recommended PCB layout guidelines to ensure optimal performance and reliability.

6. Testing and Verification:

   • After assembly, verify the correct operation of the IC by applying known input signals and measuring the outputs.
   • Check the supply current and ensure it is within the expected range to confirm the IC is functioning correctly.

For more detailed information, refer to the official datasheet and application notes provided by Analog Devices.

(For reference only)