Details

---

BUY OJE-SS-124DM https://www.utsource.net/itm/p/9750071.html

Parameter	Description
Part Number	OJE-SS-124DM
Type	Surface Mount LED
Color	Red
Wavelength (nm)	620 ± 10
Forward Voltage (Vf)	2.0 - 2.2 V at 20 mA
Reverse Voltage (Vr)	5 V
Continuous Forward Current (If)	20 mA
Peak Forward Current (Ifp)	100 mA (1/10 duty cycle, 1 kHz)
Viewing Angle	120°
Luminous Intensity (mcd)	2500 mcd at 20 mA
Operating Temperature (°C)	-40 to +85°C
Storage Temperature (°C)	-40 to +85°C
Soldering Temperature (°C)	260°C for 10 seconds
Dimensions (mm)	3.2 x 1.6 x 0.8
Lead Free	Yes
RoHS Compliant	Yes

Instructions:

1. Mounting: Ensure that the LED is mounted on a clean, flat surface. Use appropriate soldering techniques to avoid overheating.
2. Soldering: Apply heat to the pads for no more than 10 seconds at a temperature of 260°C. Exceeding this temperature or time can damage the LED.
3. Electrical Connection: Connect the longer lead (anode) to the positive terminal and the shorter lead (cathode) to the negative terminal.
4. Current Limiting: Use a current-limiting resistor to ensure the forward current does not exceed 20 mA continuous or 100 mA peak.
5. Environmental Conditions: Store and operate the LED within the specified temperature ranges to prevent damage.
6. Handling: Handle the LED with care to avoid physical damage. Use anti-static precautions to prevent electrostatic discharge (ESD) damage.
7. Testing: Test the LED using a low current initially to ensure proper functionality before applying full operating conditions.

(For reference only)