Details

---

BUY G4PC30UD IRG4PC30UDPBF IGBT TO-247 https://www.utsource.net/itm/p/9770421.html

Parameter	Symbol	Min	Typical	Max	Unit	Conditions
Collector-Emitter Voltage	VCE(off)	-	600	-	V	IC = 0, IG = 0
Gate-Emitter Voltage	VGE(th)	1.5	2.5	4.0	V	IC = 1 A, Tj = 25掳C
Continuous Collector Current	IC	-	30	-	A	TC = 25掳C
Pulse Collector Current	IC(rms)	-	45	-	A	tp = 10 ms, Tj = 25掳C
Collector-Emitter Saturation Voltage	VCE(sat)	-	1.8	-	V	IC = 30 A, VGE = 15 V, Tj = 25掳C
Turn-On Time	ton	-	0.25	-	渭s	IC = 30 A, VGE = 15 V, RG = 10 惟
Turn-Off Time	toff	-	0.25	-	渭s	IC = 30 A, VGE = 15 V, RG = 10 惟
Total Switching Loss	Esw	-	1.5	-	mJ	IC = 30 A, VCE = 600 V, fsw = 10 kHz
Thermal Resistance (Case to Ambient)	R胃CA	-	1.0	-	掳C/W	-
Junction Temperature	Tj	-	-	150	掳C	-
Storage Temperature Range	Tstg	-55	-	150	掳C	-

Instructions for Use:

1. Mounting and Handling:

   • Ensure proper heat sinking to maintain the junction temperature within safe limits.
   • Handle the device with care to avoid mechanical stress on the leads and body.

2. Electrical Connections:

   • Connect the collector (C), emitter (E), and gate (G) terminals correctly.
   • Use appropriate gate drive circuits to ensure reliable turn-on and turn-off.

3. Thermal Management:

   • Use a heatsink with adequate thermal conductivity to dissipate heat efficiently.
   • Ensure good thermal contact between the device and the heatsink.

4. Operating Conditions:

   • Do not exceed the maximum ratings for collector-emitter voltage, continuous collector current, and junction temperature.
   • Operate within the specified storage temperature range to avoid damage.

5. Testing and Measurement:

   • Use appropriate test equipment and methods to measure parameters such as V_CE(sat), V_GE(th), and switching times.
   • Ensure that the device is properly biased during testing to avoid false readings.

6. Safety Precautions:

   • Always use appropriate safety measures when handling high-voltage and high-current circuits.
   • Follow all relevant safety standards and guidelines.

(For reference only)