Details
BUY W61LV https://www.utsource.net/itm/p/9778690.html
| Parameter | Symbol | Min | Typical | Max | Unit | Notes |
|---|---|---|---|---|---|---|
| Supply Voltage | Vcc | 2.7 | - | 3.6 | V | Operating voltage range |
| Standby Current | Icc | - | 1.0 | 5 | 渭A | At Vcc = 3.0V, Ta = 25掳C |
| Active Current | Icc | - | 2.0 | 5 | mA | During read/write operations |
| Data Retention Time | - | - | 10 | - | Years | At Ta = 85掳C |
| Write Cycle Time | tWC | 2 | - | 5 | ms | Page program time |
| Sector Erase Time | tSE | 200 | - | 400 | ms | For 64K sector |
| Chip Erase Time | tCE | 20 | - | 40 | s | For full chip erase |
| Operating Temperature | Ta | -40 | - | 85 | 掳C | Industrial temperature range |
| Storage Temperature | Tstg | -65 | - | 150 | 掳C | Non-operating temperature range |
| Write Protect Pin | WP | - | - | - | - | Active low |
| Hold Pin | HOLD | - | - | - | - | Active low |
| Package Type | - | - | - | - | - | SOP, TSSOP, BGA |
Instructions:
Power Supply:
- Ensure the supply voltage (Vcc) is within the specified range of 2.7V to 3.6V.
- Connect the Vcc pin to the positive power supply and GND to the ground.
Standby and Active Current:
- The device consumes minimal current in standby mode (1.0 渭A typical).
- During active operations (read/write), the current consumption can be up to 5 mA.
Data Retention:
- The device retains data for at least 10 years at an operating temperature of 85掳C.
Write and Erase Operations:
- The write cycle time (tWC) for a page program is between 2 ms and 5 ms.
- The sector erase time (tSE) for a 64K sector is between 200 ms and 400 ms.
- The chip erase time (tCE) for a full chip erase is between 20 seconds and 40 seconds.
Temperature Considerations:
- The operating temperature range is from -40掳C to 85掳C.
- The storage temperature range is from -65掳C to 150掳C.
Control Pins:
- The Write Protect (WP) pin should be set to low to enable writing.
- The Hold (HOLD) pin should be set to low to pause ongoing operations.
Package Types:
- The device is available in various package types including SOP, TSSOP, and BGA. Choose the appropriate package type based on your application requirements.
For more detailed information, refer to the specific datasheet of the W61LV series.
(For reference only)View more about W61LV on main site
