Details

---

BUY SK510L-TP https://www.utsource.net/itm/p/9782559.html

Parameter	Description
Part Number	SK510L-TP
Type	Surface Mount Technology (SMT)
Package	SOP-8 (Small Outline Package)
Operating Voltage	4.5V to 5.5V DC
Operating Current	100mA (max)
Output Type	TTL Compatible
Frequency Range	20kHz to 40kHz
Operating Temperature	-20掳C to +70掳C
Storage Temperature	-40掳C to +85掳C
Humidity	85% RH (non-condensing)
Dimensions	10.2mm x 7.5mm x 2.8mm (LxWxH)
Weight	0.3g
Mounting Type	Surface Mount
Polarity	Observe correct polarity for Vcc and GND
ESD Rating	2kV (Human Body Model)
RoHS Compliance	Yes

Instructions for Use

1. Power Supply:

   • Connect the Vcc pin to a stable 5V DC power supply.
   • Ensure the GND pin is connected to the ground of the power supply.

2. Signal Output:

   • The output signal is TTL compatible and can be directly connected to microcontrollers or other digital circuits.
   • The output pin should be connected to the input of the receiving device.

3. Frequency Adjustment:

   • The frequency range of the SK510L-TP can be adjusted using external components such as resistors and capacitors.
   • Refer to the datasheet for specific component values and configurations.

4. Mounting:

   • Use a soldering iron with a fine tip to solder the component to the PCB.
   • Ensure all pins are securely soldered and free from shorts.

5. Handling:

   • Handle the component with care to avoid damage from static electricity.
   • Store in a dry, cool place when not in use.

6. Testing:

   • After mounting, test the component by applying the specified voltage and checking the output signal with an oscilloscope or multimeter.

7. Troubleshooting:

   • If the component does not function as expected, check for proper power supply, correct polarity, and secure connections.
   • Verify that the external components (if used) are correctly installed and meet the required specifications.

(For reference only)