Details

---

BUY HCPL-7860 https://www.utsource.net/itm/p/9881808.html
IC ISOLATED MODULE 12BIT 8DIP

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Input Current (Forward)	IF	-	10	50	mA	VDD = 5V, TA = 25°C
Input Voltage (Forward)	VF	1.1	1.3	1.5	V	IF = 20mA, TA = 25°C
Input Voltage (Reverse)	VR	-5	-	-2	V	IF = 0mA, TA = 25°C
Output High Voltage	VOH	4.5	-	5.5	V	IOL = 0mA, VDD = 5V, TA = 25°C
Output Low Voltage	VOL	-	0.1	0.4	V	IOL = 16mA, VDD = 5V, TA = 25°C
Propagation Delay Time	tpd	1	2	3	μs	VDD = 5V, IF = 20mA, TA = 25°C
Rise Time	tr	0.5	1	1.5	μs	VDD = 5V, IF = 20mA, TA = 25°C
Fall Time	tf	0.5	1	1.5	μs	VDD = 5V, IF = 20mA, TA = 25°C
Operating Temperature Range	TA	-40	-	85	°C	-
Storage Temperature Range	TSTG	-55	-	125	°C	-

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_DD) is within the specified range (4.5V to 5.5V).
   • Connect the ground (GND) pin to the system ground.

2. Input Signal:

   • Apply the input current (IF) within the range of 10mA to 50mA.
   • The forward voltage (V_F) should be between 1.1V and 1.5V when IF is 20mA.
   • Avoid applying reverse voltage (V_R) greater than -2V.

3. Output Signal:

   • The output high voltage (V_OH) should be at least 4.5V when no load current is present.
   • The output low voltage (V_OL) should be less than 0.4V when the load current is 16mA.

4. Timing Parameters:

   • The propagation delay time (t_pd) should be between 1μs and 3μs.
   • The rise time (t_r) and fall time (t_f) should be between 0.5μs and 1.5μs.

5. Temperature Considerations:

   • Operate the device within the temperature range of -40°C to 85°C.
   • Store the device within the temperature range of -55°C to 125°C.

6. Handling:

   • Handle the device with care to avoid static damage.
   • Follow proper soldering techniques to ensure reliable connections.

7. Testing:

   • Verify all connections and parameters using a multimeter or oscilloscope before finalizing the circuit.

By following these instructions, you can ensure optimal performance and reliability of the HCPL-7860 optocoupler in your application.

(For reference only)