Details

---

BUY TFP401APZPR https://www.utsource.net/itm/p/9896735.html
IC RECEIVER 0/3 100HTQFP

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD	2.7	3.3	5.5	V	Operating supply voltage range
Standby Current	ISB	-	10	-	μA	Current consumption in standby mode
Operating Temperature	TOPR	-40	-	85	°C	Operating temperature range
Storage Temperature	TSTG	-65	-	150	°C	Storage temperature range
Differential Input Range	VIN	-0.3	-	VDD+0.3	V	Maximum differential input voltage range
Output Voltage Swing	VOUT	-0.3	-	VDD-0.3	V	Output voltage swing range
Slew Rate	SR	-	10	-	V/μs	Slew rate of the output stage
Bandwidth	BW	-	10	-	MHz	Small-signal bandwidth
CMRR	CMRR	-	80	-	dB	Common-mode rejection ratio at 1 kHz
PSRR	PSRR	-	70	-	dB	Power supply rejection ratio at 1 kHz
THD+N	THD+N	-	0.1	-	%	Total harmonic distortion plus noise (at 1 kHz, 1 Vpp)
ESD Rating	HBM	-	2000	-	V	Human body model electrostatic discharge rating

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage is within the specified range (2.7V to 5.5V).
   • Use a stable power source to avoid fluctuations that can affect performance.

2. Input Signal:

   • The differential input voltage should not exceed the specified range (-0.3V to VDD + 0.3V).
   • Avoid applying signals with excessive amplitude to prevent damage to the device.

3. Output Configuration:

   • The output voltage swing should be within the specified limits (-0.3V to VDD - 0.3V).
   • Use appropriate load resistors to match the output impedance of the device.

4. Temperature Considerations:

   • Operate the device within the specified temperature range (-40°C to 85°C).
   • Store the device within the storage temperature range (-65°C to 150°C).

5. Electrostatic Discharge (ESD):

   • Handle the device with care to avoid ESD damage.
   • Use proper grounding and ESD protection measures during handling and assembly.

6. Performance Optimization:

   • For optimal performance, ensure the device is properly decoupled with capacitors close to the power pins.
   • Use a clean and stable reference voltage for best results.

7. Testing and Evaluation:

   • When testing the device, use a signal generator with known characteristics to verify performance parameters.
   • Measure THD+N, CMRR, and PSRR using standard test setups and equipment.

By following these guidelines, you can ensure reliable and efficient operation of the TFP401APZPR.

(For reference only)