Details

---

BUY 1.5KE150CA https://www.utsource.net/itm/p/11206687.html
TVS Diode

Parameter	Symbol	Value	Unit
Maximum Repetitive Peak Reverse Voltage	VRRM	150	V
Maximum DC Blocking Voltage	VR	100	V
Maximum RMS Voltage	VRRMS	106	V
Maximum Average Rectified Forward Current (Tc=75掳C)	IF(AV)	1.5	A
Non-Repetitive Peak Surge Current (Tj=25掳C, t=10ms)	IFSM	30	A
Junction Temperature Range	TJ	-65 to 175	掳C
Storage Temperature Range	TSTG	-65 to 150	掳C
Operating Temperature Range	TOPR	-65 to 125	掳C
Forward Voltage at Rated Current (IF=1.5A)	VF	1.1	V
Reverse Leakage Current at 25掳C (VR=100V)	IR	5	渭A

Instructions for Use:

1. Mounting:

   • Ensure the device is mounted on a heatsink if continuous operation at high current or in high ambient temperatures is expected.
   • Use thermal compound between the device and heatsink to improve heat dissipation.

2. Electrical Connections:

   • Connect the anode and cathode terminals correctly to avoid reverse polarity, which can lead to device failure.
   • Use appropriate wire gauge to handle the maximum current rating.

3. Thermal Management:

   • Monitor the junction temperature to ensure it does not exceed the maximum rated temperature.
   • If operating in high ambient temperatures, consider additional cooling methods such as forced air or liquid cooling.

4. Surge Handling:

   • The device can handle non-repetitive surge currents up to 30A for 10ms at 25掳C. Ensure that any surge conditions are within these limits to prevent damage.

5. Storage:

   • Store the device in a dry, cool environment within the storage temperature range to prevent degradation.

6. Handling:

   • Handle with care to avoid mechanical stress, which can damage the device.
   • Use ESD (Electrostatic Discharge) protection when handling to prevent damage from static electricity.

7. Testing:

   • Before installing the device in a circuit, test its parameters using a multimeter or other suitable testing equipment to ensure it meets the specified values.

8. Compliance:

   • Ensure that the device is used in compliance with all relevant safety and regulatory standards.

(For reference only)