Details

---

BUY SGL160N60UFD https://www.utsource.net/itm/p/11226128.html

Parameter	Symbol	Min	Typ	Max	Unit
Drain-Source Voltage	VDS	-60	-	-100	V
Gate-Source Voltage	VGS	-20	-	20	V
Continuous Drain Current	ID	-	160	-	A
Pulse Drain Current	IDpeak	-	320	-	A
Power Dissipation	PD	-	-	250	W
Junction Temperature	TJ	-55	-	175	掳C
Storage Temperature	TSTG	-55	-	150	掳C

Instructions for Use

1. Handling Precautions:

   • Handle the SGL160N60UFD with care to avoid damage to the leads and the body.
   • Use proper ESD (Electrostatic Discharge) protection when handling the device to prevent damage from static electricity.

2. Mounting:

   • Ensure that the mounting surface is clean and flat.
   • Apply thermal paste or a thermal pad between the device and the heatsink to improve heat dissipation.
   • Secure the device using recommended torque values for the mounting screws to ensure good thermal contact without causing mechanical stress.

3. Electrical Connections:

   • Connect the drain (D), source (S), and gate (G) terminals correctly.
   • Use short and thick wires to minimize inductance and resistance.
   • Ensure that the gate drive circuit is designed to provide sufficient drive current and voltage to switch the MOSFET quickly and efficiently.

4. Thermal Management:

   • Monitor the junction temperature (T_J) to ensure it does not exceed the maximum rating of 175掳C.
   • Use a heatsink with adequate thermal capacity and cooling (e.g., forced air, liquid cooling) to maintain the device within safe operating temperatures.

5. Operating Conditions:

   • Do not exceed the maximum ratings for drain-source voltage (V_DS), gate-source voltage (V_GS), and continuous drain current (I_D).
   • Ensure that the power dissipation (P_D) is within the rated limits by providing adequate cooling.

6. Storage:

   • Store the device in a dry, cool place away from direct sunlight and sources of heat.
   • Keep the device in its original packaging until ready for use to protect against moisture and physical damage.

7. Testing:

   • Before installing the device in a circuit, perform a continuity test to ensure there are no short circuits or open circuits.
   • Test the device under controlled conditions to verify its performance and reliability.

8. Disposal:

   • Dispose of the device according to local environmental regulations and guidelines for electronic waste.

For more detailed information, refer to the datasheet provided by the manufacturer.

(For reference only)