Details

---

BUY 30CTQ060 https://www.utsource.net/itm/p/11226148.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage	VIN	2.7	-	5.5	V	Operating input voltage range
Output Voltage	VOUT	-	3.3	-	V	Regulated output voltage
Output Current	IOUT	-	600	-	mA	Maximum continuous output current
Quiescent Current	IQ	-	1.8	-	μA	Quiescent current at no load
Dropout Voltage	VDROPOUT	-	250	-	mV	Typical dropout voltage
Load Regulation	RL	-	0.5	-	%	Load regulation from 0 to IOUT(max)
Line Regulation	RLN	-	0.2	-	%/V	Line regulation
PSRR		-	55	-	dB	Power supply rejection ratio at 1kHz

Instructions for Using the 30CTQ060:

1. Input Voltage Connection:

   • Connect the input voltage between 2.7V and 5.5V to the VIN pin.

2. Output Voltage Configuration:

   • The device provides a fixed output voltage of 3.3V. No external components are required for voltage setting.

3. Output Current Handling:

   • Ensure that the load does not exceed 600mA to avoid overheating or damage to the device.

4. Quiescent Current Consideration:

   • The quiescent current is very low, around 1.8μA, making this device suitable for battery-operated applications.

5. Dropout Voltage Awareness:

   • Keep in mind the typical dropout voltage of 250mV when designing your power supply system to ensure proper operation.

6. Regulation Parameters:

   • The load regulation is within 0.5% and line regulation is within 0.2%/V, ensuring stable output under varying conditions.

7. Power Supply Rejection Ratio (PSRR):

   • With a PSRR of 55dB at 1kHz, the device effectively filters out ripple and noise from the input supply.

8. Thermal Considerations:

   • Ensure adequate heat dissipation if operating near the maximum output current to prevent thermal shutdown.

9. Capacitor Requirements:

   • For stability, use recommended input and output capacitors as specified in the datasheet.

10. Installation and Handling:

    • Handle with care to avoid electrostatic discharge (ESD) damage. Follow standard ESD precautions during installation.

(For reference only)