Details

---

BUY FDA38N30 https://www.utsource.net/itm/p/11241320.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Drain-Source Voltage	VDS	-30	-	30	V	Maximum drain-to-source voltage
Gate-Source Voltage	VGS	-15	-	15	V	Maximum gate-to-source voltage
Continuous Drain Current	ID	-	8	12	A	Continuous drain current at 25掳C
Pulse Drain Current	IDpeak	-	30	-	A	Peak pulse drain current (tp = 10 ms, duty cycle = 1%)
Power Dissipation	PD	-	-	60	W	Maximum power dissipation
Junction Temperature	TJ	-	-	150	掳C	Maximum junction temperature
Storage Temperature	TSTG	-55	-	150	掳C	Operating storage temperature range
Thermal Resistance	R胃JC	-	1.5	-	掳C/W	Junction to case thermal resistance

Instructions for Use:

1. Handling and Storage:

   • Store the FDA38N30 in a dry environment to prevent moisture damage.
   • Handle with care to avoid mechanical damage, especially to the leads.

2. Mounting:

   • Ensure proper heat sinking if operating at high power levels to maintain junction temperature within safe limits.
   • Follow recommended soldering profiles to avoid thermal shock during assembly.

3. Electrical Connections:

   • Connect the gate to the control circuit with low inductance to minimize switching losses.
   • Use bypass capacitors close to the device to stabilize the power supply and reduce noise.

4. Operating Conditions:

   • Do not exceed the maximum ratings specified in the table.
   • Monitor the junction temperature to ensure it does not exceed 150掳C.
   • For continuous operation, keep the drain current within the typical range to avoid overheating.

5. Testing:

   • Use appropriate test equipment and methods to verify the performance of the FDA38N30.
   • Perform tests under controlled conditions to ensure accurate results.

6. Safety:

   • Always follow safety guidelines when working with high voltages and currents.
   • Use protective equipment such as gloves and goggles when handling the device.

7. Troubleshooting:

   • If the device fails, check for overvoltage, overcurrent, or overheating conditions.
   • Verify that the device is properly mounted and connected according to the specifications.

For more detailed information, refer to the datasheet provided by the manufacturer.

(For reference only)