Details

---

BUY MM74HC04N https://www.utsource.net/itm/p/11242208.html
IC INVERTER 6CH 6-INP 14DIP

Parameter	Symbol	Conditions	Min	Typical	Max	Unit
Input Low Voltage	VIL	VCC = 4.5V to 5.5V	-0.5	-	1.5	V
Input High Voltage	VIH	VCC = 4.5V to 5.5V	3.0	-	5.5	V
Output Low Voltage	VOL	IOL = 4mA, VCC = 4.5V to 5.5V	0.0	-	0.4	V
Output High Voltage	VOH	IOH = -0.4mA, VCC = 4.5V to 5.5V	2.4	-	5.5	V
Input Leakage Current	IIL	VIN = 0V or VCC, VCC = 4.5V to 5.5V	-1.0	-	1.0	μA
Output Short-Circuit Current	ISC	VOUT = 0V, VCC = 4.5V to 5.5V	-	-	25	mA
Propagation Delay Time	tpd	VCC = 4.5V to 5.5V, TA = 25°C	-	9	-	ns
Power Supply Range	VCC	-	2.0	-	6.0	V
Operating Temperature	TA	-	-40	-	85	°C

Instructions for Use:

1. Power Supply:

   • The MM74HC04N operates with a power supply voltage (V_CC) ranging from 2.0V to 6.0V. Ensure that the supply voltage is within this range to avoid damage to the device.

2. Input Voltage:

   • Input voltages should be within the specified limits: V_IL (0.0V to 1.5V) for logic low and V_IH (3.0V to 5.5V) for logic high.
   • Avoid applying voltages outside these ranges to prevent incorrect operation or damage.

3. Output Voltage:

   • The output voltage levels are defined as V_OL (0.0V to 0.4V) for logic low and V_OH (2.4V to 5.5V) for logic high.
   • Ensure that the load connected to the output can handle these voltage levels.

4. Current Handling:

   • The maximum output current (I_OL) when the output is low is 4mA.
   • The maximum output current (I_OH) when the output is high is -0.4mA.
   • The short-circuit current (I_SC) should not exceed 25mA to avoid damaging the device.

5. Propagation Delay:

   • The typical propagation delay time (t_pd) at room temperature (25°C) is 9ns. This value may vary slightly depending on the operating conditions.

6. Temperature Range:

   • The device is designed to operate over a temperature range from -40°C to 85°C. Ensure that the operating environment does not exceed these limits.

7. Handling Precautions:

   • Handle the device with care to avoid static discharge, which can damage the internal circuits.
   • Use appropriate anti-static precautions when handling and installing the device.

8. Mounting and Soldering:

   • Follow standard soldering procedures to ensure reliable connections.
   • Avoid excessive heat during soldering to prevent damage to the device.

By following these guidelines, you can ensure optimal performance and longevity of the MM74HC04N hex inverter.

(For reference only)