Details

---

BUY FQD12N20LTM https://www.utsource.net/itm/p/11244355.html

Parameter	Symbol	Min	Typical	Max	Unit	Conditions
Drain-Source Voltage	VDS	-	200	-	V
Gate-Source Voltage	VGS	-20	0	20	V
Continuous Drain Current	ID	-	12	-	A	TC = 25掳C
Pulse Drain Current	ID(pulse)	-	36	-	A	tp = 10 渭s, IG = 5 A
Power Dissipation	PTOT	-	240	-	W	TC = 25掳C
Junction Temperature	TJ	-	-	175	掳C
Storage Temperature	TSTG	-55	-	150	掳C
Thermal Resistance, Junction to Case	R胃JC	-	0.8	-	掳C/W
Total Gate Charge	QG	-	13	-	nC	VGS = 10 V, ID = 12 A
Input Capacitance	Ciss	-	1950	-	pF	VDS = 200 V, f = 1 MHz
Output Capacitance	Coss	-	320	-	pF	VDS = 200 V, f = 1 MHz
Reverse Transfer Capacitance	Crss	-	110	-	pF	VDS = 200 V, f = 1 MHz

Instructions for Use:

1. Handling Precautions:

   • The FQD12N20LTM is sensitive to electrostatic discharge (ESD). Handle with care and use proper ESD protection.
   • Avoid exceeding the maximum ratings listed in the table to prevent damage to the device.

2. Mounting:

   • Ensure good thermal management by using a heat sink if necessary to keep the junction temperature within safe limits.
   • Follow the recommended PCB layout guidelines to minimize parasitic inductances and ensure reliable operation.

3. Gate Drive:

   • Use a gate resistor to control the switching speed and reduce electromagnetic interference (EMI).
   • Ensure the gate drive voltage is within the specified range to avoid over-driving or under-driving the device.

4. Operation:

   • The device can be used in a variety of applications such as motor control, power supplies, and inverters.
   • Monitor the drain current and power dissipation to ensure they remain within the safe operating area (SOA).

5. Storage:

   • Store the device in a dry, cool place away from direct sunlight and sources of heat.
   • Keep the device in its original packaging until ready for use to protect against static and physical damage.

6. Testing:

   • Before applying power, verify all connections and ensure the circuit is correctly configured.
   • Use appropriate test equipment to measure parameters and confirm the device is functioning as expected.

For more detailed information, refer to the datasheet provided by the manufacturer.

(For reference only)