Details

---

BUY MOC3063S-TA1 https://www.utsource.net/itm/p/11246210.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Forward Voltage	VF	IF = 20 mA	1.1	1.3	1.5	V
Reverse Breakdown Voltage	VR	IR = 1 mA	5	-	7	V
Peak Forward Current	IF(peak)	t = 10 ms, duty cycle = 1/1000	50	-	-	mA
Continuous Forward Current	IF(avg)	TA = 25掳C	-	10	-	mA
Turn-On Time	ton	IF = 20 mA, RL = 1 k惟	-	4	8	渭s
Turn-Off Time	toff	IF = 20 mA, RL = 1 k惟	-	4	8	渭s
Isolation Voltage	VIORM	1 minute, 50/60 Hz	-	-	4000	Vrms
Operating Temperature Range	TA	-	-40	-	105	掳C
Storage Temperature Range	TSTG	-	-55	-	150	掳C

Instructions for Using MOC3063S-TA1

1. Mounting and Handling:

   • Handle the device with care to avoid mechanical stress.
   • Ensure proper alignment and orientation during mounting to prevent short circuits.

2. Electrical Connections:

   • Connect the anode (A) and cathode (K) terminals correctly to the control circuit.
   • Connect the output terminals (MT1 and MT2) to the load and power supply.

3. Heat Dissipation:

   • Ensure adequate heat dissipation if operating at high currents or temperatures.
   • Use a heatsink if necessary to maintain the device within its specified temperature range.

4. Forward Current:

   • Do not exceed the peak forward current (I_F(peak)) for more than 10 ms in any 1000 ms period.
   • Keep the continuous forward current (I_F(avg)) within the specified limits to avoid overheating.

5. Reverse Voltage:

   • Ensure that the reverse voltage applied does not exceed the maximum reverse breakdown voltage (V_R).

6. Isolation:

   • Maintain the isolation voltage (V_IORM) to ensure safe operation and prevent electrical breakdown between the input and output sides.

7. Temperature:

   • Operate the device within the specified operating temperature range (T_A) to ensure reliable performance.
   • Store the device within the storage temperature range (T_STG) to prevent damage.

8. Testing:

   • Perform initial testing under controlled conditions to verify proper operation.
   • Regularly inspect the device for signs of wear or damage.

By following these guidelines, you can ensure optimal performance and longevity of the MOC3063S-TA1 optocoupler.

(For reference only)