Details

---

BUY MC33072DR2G https://www.utsource.net/itm/p/11246247.html

Parameter	Description	Min	Typ	Max	Unit
Supply Voltage (VCC)	Operating supply voltage range	2.0	-	44.0	V
Quiescent Current (IQ)	Current consumption per operational amplifier at VCC = 5V	-	120	-	渭A
Input Offset Voltage (VIO)	Maximum input offset voltage at 25掳C	-	5	25	mV
Input Bias Current (IB)	Maximum input bias current at 25掳C	-	50	500	nA
Input Voltage Range (VI)	Range of input voltages that can be applied to the inputs without damaging the device	VEE - 0.3	-	VCC + 0.3	V
Output Voltage Swing (VOUT)	Output voltage swing from rail to rail at VCC = 5V, IOUT = 10mA	0.2	-	VCC - 0.2	V
Slew Rate (SR)	Maximum rate of change of output voltage with respect to time	-	0.5	-	V/渭s
Common Mode Rejection Ratio (CMRR)	Ability to reject common mode signals at 1kHz	80	-	-	dB
Power Supply Rejection Ratio (PSRR)	Ability to reject changes in supply voltage at 1kHz	80	-	-	dB
Operating Temperature Range (TOP)	Range of ambient temperatures over which the device is specified to operate	-40	-	125	掳C
Storage Temperature Range (TSTG)	Range of temperatures over which the device can be stored without damage	-65	-	150	掳C

Instructions for Using MC33072DR2G

1. Supply Voltage:

   • Ensure the supply voltage (V_CC) is within the range of 2.0V to 44.0V.
   • Connect the positive supply to V_CC and the negative supply to V_EE.

2. Input Signals:

   • Keep input voltages within the range V_EE - 0.3V to V_CC + 0.3V to avoid damaging the device.
   • Use appropriate input biasing if necessary to ensure stable operation.

3. Output Configuration:

   • The output voltage swing is typically 0.2V to V_CC - 0.2V at 5V supply and 10mA load current.
   • Ensure the load resistance is compatible with the output current capability of the device.

4. Temperature Considerations:

   • Operate the device within the temperature range of -40掳C to 125掳C for reliable performance.
   • Store the device in a temperature range of -65掳C to 150掳C.

5. Power Supply Decoupling:

   • Use decoupling capacitors (typically 0.1渭F and 10渭F) close to the power supply pins to reduce noise and improve stability.

6. Handling Precautions:

   • Handle the device with care to avoid static discharge, which can damage the internal components.
   • Follow proper soldering techniques to prevent thermal damage during assembly.

7. Testing and Troubleshooting:

   • Measure the quiescent current to ensure it is within the typical range of 120渭A.
   • Check the input offset voltage and bias current to ensure they meet the specified limits.
   • Verify the output voltage swing and slew rate to confirm proper operation.

By following these guidelines, you can ensure optimal performance and reliability of the MC33072DR2G operational amplifier.

(For reference only)