Details

---

BUY MOC3063-A https://www.utsource.net/itm/p/11246253.html

Parameter	Symbol	Min	Typical	Max	Unit	Condition
Input Forward Voltage	VIF	-	1.2	1.5	V	@ IF = 20 mA, TA = 25掳C
Input Reverse Breakdown Voltage	VBR	5	-	7	V	@ IR = 1 mA, TA = 25掳C
Input Current (Turn-On)	IFT	5	-	15	mA	@ VDD = 110 VAC, RL = 100 惟, TA = 25掳C
Input Current (Turn-Off)	IF(OFF)	-	0.1	0.2	mA	@ VDD = 110 VAC, RL = 100 惟, TA = 25掳C
Output Peak On-State Voltage	VTM	-	1.4	1.8	V	@ IT(RMS) = 1 A, TA = 25掳C
Output RMS On-State Voltage	VTM(RMS)	-	1.0	1.4	V	@ IT(RMS) = 1 A, TA = 25掳C
Output Peak Reverse Voltage	VDRM	600	-	800	V	@ IT = 0 A, TA = 25掳C
Output RMS Reverse Voltage	VDRM(RMS)	400	-	560	V	@ IT = 0 A, TA = 25掳C
Maximum Repetitive Peak Off-State Current	ITSM	-	-	10	mA	@ VDRM = 600 V, TA = 25掳C
Maximum RMS Output Current	IT(RMS)	-	-	1	A	@ TA = 25掳C
Maximum Non-Repetitive Peak Output Current	ITSM	-	-	10	A	@ TA = 25掳C, t = 10 ms
Maximum Junction Temperature	TJ(max)	-	-	125	掳C	-
Storage Temperature Range	TSTG	-40	-	125	掳C	-

Instructions for Use:

1. Input Connection:

   • Connect the input side of the MOC3063-A to the control circuit.
   • Ensure the input current is within the specified range to avoid damage.

2. Output Connection:

   • Connect the output side to the load and the AC power supply.
   • Ensure the load resistance and voltage are within the specified limits.

3. Heat Dissipation:

   • The device should be mounted on a heatsink if operating at high currents or in high ambient temperatures to prevent overheating.

4. Isolation:

   • The MOC3063-A provides electrical isolation between the input and output circuits, which helps in protecting the control circuit from high-voltage transients.

5. Operating Conditions:

   • Operate the device within the specified temperature and voltage ranges to ensure reliable performance.
   • Avoid exceeding the maximum junction temperature to prevent thermal damage.

6. Storage:

   • Store the device in a dry, cool place away from direct sunlight and corrosive environments.

7. Handling:

   • Handle the device with care to avoid mechanical damage.
   • Follow proper ESD (Electrostatic Discharge) precautions to prevent damage from static electricity.

(For reference only)