Details

---

BUY CD40106BE https://www.utsource.net/itm/p/11246288.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	-	3	-	18	V
Input Low Voltage	VIL	-	-	0.5	-	V
Input High Voltage	VIH	-	-	VCC - 1.5	-	V
Output Low Voltage	VOL	IOL = 4 mA	-	0.4	-	V
Output High Voltage	VOH	IOH = -0.4 mA	-	VCC - 2.5	-	V
Propagation Delay Time	tpd	VCC = 5 V, VI = VOH, VO = VOL	-	70	-	ns
Power Dissipation	PTOT	-	-	-	100	mW
Operating Temperature Range	TA	-	-40	-	85	掳C
Storage Temperature Range	TSTG	-	-65	-	150	掳C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 3V to 18V.
   • Connect the ground (GND) pin to a stable reference potential.

2. Input Signals:

   • Input signals should be within the specified input voltage levels:
     • Low level (V_IL): typically 0.5V or less.
     • High level (V_IH): typically V_CC - 1.5V or more.
   • Avoid applying voltages outside the V_CC range to prevent damage.

3. Output Signals:

   • The output low voltage (V_OL) should not exceed 0.4V when sourcing 4mA.
   • The output high voltage (V_OH) should be at least V_CC - 2.5V when sinking 0.4mA.
   • Ensure the load connected to the output does not exceed the maximum current ratings.

4. Propagation Delay:

   • The typical propagation delay time (t_pd) is 70ns at V_CC = 5V. This can vary with different supply voltages and operating conditions.

5. Thermal Management:

   • The total power dissipation (P_TOT) should not exceed 100mW to avoid overheating.
   • Operate the device within the specified temperature ranges:
     • Operating temperature (T_A): -40掳C to 85掳C.
     • Storage temperature (T_STG): -65掳C to 150掳C.

6. Handling:

   • Handle the CD40106BE with care to avoid static discharge, which can damage the device.
   • Use proper ESD protection measures during handling and installation.

7. Mounting:

   • Ensure proper soldering and mounting techniques to maintain reliable connections.
   • Follow recommended PCB layout guidelines to minimize noise and ensure optimal performance.

(For reference only)