Details

---

BUY 74HC11D https://www.utsource.net/itm/p/11246370.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC		2.0		6.0	V
Input Low Voltage	VIL	IL = -0.5 mA		0.3	1.5	V
Input High Voltage	VIH	IH = 0.5 mA	3.5		VCC	V
Output Low Voltage	VOL	IOL = 4 mA		0.1	0.4	V
Output High Voltage	VOH	IOH = -4 mA	VCC - 0.4	VCC - 0.1	VCC	V
Propagation Delay Time	tpd	VCC = 5 V, TA = 25掳C	8	11	16	ns
Power Dissipation	PD	Per Package			100	mW
Operating Temperature	TA		-40		85	掳C
Storage Temperature	TSTG		-65		150	掳C

Instructions for Using 74HC11D:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 2.0 V to 6.0 V.
   • Connect the ground (GND) pin to a stable reference ground.

2. Input Signals:

   • Apply input signals such that the low-level voltage (V_IL) is between 0.3 V and 1.5 V.
   • Ensure the high-level voltage (V_IH) is at least 3.5 V or up to the supply voltage (V_CC).

3. Output Signals:

   • The output low voltage (V_OL) should be no more than 0.4 V when sourcing 4 mA.
   • The output high voltage (V_OH) should be at least V_CC - 0.4 V when sinking -4 mA.

4. Propagation Delay:

   • The propagation delay time (t_pd) is the time it takes for the output to respond to a change in the input. At 5 V and 25掳C, this is typically between 8 ns and 16 ns.

5. Thermal Considerations:

   • The operating temperature range is from -40掳C to 85掳C.
   • Store the device in an environment with temperatures ranging from -65掳C to 150掳C.

6. Handling:

   • Handle the device with care to avoid damage from electrostatic discharge (ESD).
   • Use appropriate ESD protection measures during handling and installation.

7. Mounting:

   • Ensure proper mounting and soldering techniques to maintain reliable connections.
   • Avoid excessive heat during soldering to prevent damage to the device.

8. Testing:

   • Test the device under specified conditions to ensure it meets the performance parameters listed in the table.

By following these instructions, you can ensure optimal performance and reliability of the 74HC11D component.

(For reference only)