Details

---

BUY 74HC08ADR2G https://www.utsource.net/itm/p/11246385.html

Parameter	Description	Min	Typ	Max	Unit
Supply Voltage (VCC)	Operating supply voltage range	2.0	-	6.0	V
Input Low Voltage (VIL)	Maximum input low voltage	-0.5	-	1.5	V
Input High Voltage (VIH)	Minimum input high voltage	3.5	-	6.5	V
Output Low Voltage (VOL)	Maximum output low voltage at IOL = 4 mA	-0.1	-	0.4	V
Output High Voltage (VOH)	Minimum output high voltage at IOH = -4 mA	2.4	-	5.25	V
Propagation Delay Time (tpd)	Propagation delay time	-	12	20	ns
Power Dissipation (PD)	Maximum power dissipation	-	-	100	mW
Operating Temperature Range (TA)	Operating ambient temperature range	-40	-	85	°C
Storage Temperature Range (TSTG)	Storage temperature range	-65	-	150	°C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the specified range of 2.0V to 6.0V.
   • Connect V_CC to the positive power supply and GND to the ground.

2. Input Signals:

   • Apply input signals that meet the specified input voltage levels:
     • Input Low (V_IL): ≤ 1.5V
     • Input High (V_IH): ≥ 3.5V

3. Output Signals:

   • The output signals will be:
     • Output Low (V_OL): ≤ 0.4V when sinking 4 mA
     • Output High (V_OH): ≥ 2.4V when sourcing -4 mA

4. Propagation Delay:

   • The propagation delay time (t_pd) should be considered in timing-sensitive applications, with a typical value of 12 ns and a maximum of 20 ns.

5. Power Dissipation:

   • Do not exceed the maximum power dissipation (P_D) of 100 mW to avoid overheating and potential damage to the device.

6. Temperature Considerations:

   • Operate the device within the specified operating temperature range (-40°C to 85°C).
   • Store the device within the storage temperature range (-65°C to 150°C).

7. Handling:

   • Handle the device with care to avoid static discharge, which can damage the sensitive components.
   • Follow proper soldering techniques and ensure the device is securely mounted on the PCB.

8. Testing:

   • Before finalizing the design, test the device under various conditions to ensure it meets the required performance specifications.

(For reference only)