Details

---

BUY CD4536BE https://www.utsource.net/itm/p/11246394.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	3.0	-	18	V
Input High Voltage	VIH	II = -1 渭A	2.0	-	VCC - 0.5	V
Input Low Voltage	VIL	II = 1 渭A	0	-	0.8	V
Output High Voltage	VOH	IO = -1 mA, VCC = 15 V	13.5	-	15	V
Output Low Voltage	VOL	IO = 1 mA, VCC = 15 V	0	-	0.5	V
Propagation Delay Time	tpd	VCC = 5 V, TA = 25掳C	-	70	-	ns
Power Dissipation	PD	Continuous	-	-	100	mW
Operating Temperature	TA	Storage	-40	-	85	掳C

Instructions for Using the CD4536BE

1. Supply Voltage:

   • Ensure the supply voltage (V_CC) is within the range of 3.0 V to 18 V. Avoid exceeding these limits to prevent damage to the device.

2. Input Levels:

   • For a high input (V_IH), the voltage should be at least 2.0 V and can go up to V_CC - 0.5 V.
   • For a low input (V_IL), the voltage should be between 0 V and 0.8 V.

3. Output Levels:

   • When the output is high (V_OH), it will be at least 13.5 V and can reach up to 15 V when V_CC is 15 V.
   • When the output is low (V_OL), it will be between 0 V and 0.5 V when V_CC is 15 V.

4. Propagation Delay:

   • The propagation delay time (t_pd) is typically 70 ns at V_CC = 5 V and T_A = 25掳C. This is the time it takes for the output to change state after the input changes.

5. Power Dissipation:

   • The maximum power dissipation (P_D) is 100 mW. Ensure that the device does not exceed this limit to avoid overheating.

6. Operating Temperature:

   • The operating temperature range (T_A) is from -40掳C to 85掳C. Store the device within this range to ensure reliable operation.

7. Handling:

   • Handle the device with care to avoid static discharge, which can damage the internal components. Use appropriate ESD protection measures.

8. Circuit Design:

   • Ensure proper decoupling capacitors are used near the power supply pins to filter out noise and stabilize the supply voltage.
   • Follow good PCB layout practices to minimize signal interference and ensure reliable performance.

9. Testing:

   • Before finalizing the design, test the device under various conditions to ensure it meets the required specifications and operates correctly.

By following these guidelines, you can ensure the CD4536BE operates reliably and efficiently in your application.

(For reference only)