Details

---

BUY CD4073BE https://www.utsource.net/itm/p/11246419.html
IC GATE AND 3CH 3-INP 14DIP

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	-	3	-	18	V
Input Low Voltage	VIL	IL = 1mA	-	0.8	-	V
Input High Voltage	VIH	IH = -1mA	-	2	-	V
Output Low Voltage	VOL	IOL = 10mA	0	0.1	0.5	V
Output High Voltage	VOH	IOH = -10mA	2.4	4.5	VDD-0.5	V
Propagation Delay Time	tpd	VDD = 5V, f = 10MHz	9	-	35	ns
Power Dissipation	PD	-	-	-	100	mW
Operating Temperature	TA	-	-40	-	85	°C
Storage Temperature	TSTG	-	-65	-	150	°C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_DD) is within the specified range of 3V to 18V.
   • Connect the ground (GND) pin to a stable reference ground.

2. Input Signals:

   • For a logic low input, ensure the voltage is below 0.8V.
   • For a logic high input, ensure the voltage is above 2V.

3. Output Signals:

   • When the output is low, the voltage will be between 0V and 0.5V.
   • When the output is high, the voltage will be between 2.4V and V_DD-0.5V.

4. Propagation Delay:

   • The propagation delay time (t_pd) is the time it takes for the output to change state after the input changes. At 5V supply voltage and 10MHz frequency, it ranges from 9ns to 35ns.

5. Power Dissipation:

   • The maximum power dissipation (P_D) is 100mW. Ensure the device is not operated beyond this limit to avoid overheating.

6. Temperature:

   • The operating temperature range (T_A) is from -40°C to 85°C.
   • The storage temperature range (T_STG) is from -65°C to 150°C.

7. Handling:

   • Handle the CD4073BE with care to avoid static damage. Use proper ESD protection measures.
   • Ensure all connections are secure and free from short circuits.

8. Testing:

   • Before integrating the CD4073BE into a circuit, test it individually to verify its functionality.
   • Use a multimeter to check the supply voltage and output levels.

By following these guidelines, you can ensure reliable operation of the CD4073BE in your application.

(For reference only)