Details

---

BUY IXGH48N60C3D1 https://www.utsource.net/itm/p/11246676.html

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Drain-Source Voltage	VDS	-	600	-	V
Gate-Source Voltage	VGS	-20	-	20	V
Continuous Drain Current	ID	-	48	-	A	@ TC = 25掳C
Pulse Drain Current	ID(p)	-	192	-	A	tp = 10 渭s, IGT = 10 A
Total Power Dissipation	PTOT	-	300	-	W	@ TC = 25掳C
Junction Temperature	TJ	-	-	175	掳C
Storage Temperature	TSTG	-55	-	150	掳C
Thermal Resistance, Junction to Case	R胃JC	-	0.38	-	掳C/W

Instructions for Use:

1. Handling Precautions:

   • Handle the IXGH48N60C3D1 with care to avoid damage to the pins and the die.
   • Use proper ESD (Electrostatic Discharge) protection when handling the device.

2. Mounting:

   • Ensure that the device is mounted on a heatsink or a PCB with adequate thermal management to keep the junction temperature within the specified limits.
   • Use thermal paste or a thermal pad between the device and the heatsink to improve heat dissipation.

3. Biasing:

   • Apply the gate-source voltage (V_GS) carefully to avoid exceeding the maximum ratings.
   • Ensure that the gate drive circuitry can provide sufficient current to charge and discharge the gate capacitance quickly for efficient switching.

4. Operation:

   • Operate the device within the specified drain-source voltage (V_DS) and continuous drain current (I_D) limits.
   • For pulse operation, ensure that the pulse duration and current do not exceed the specified pulse drain current (I_D(p)).

5. Storage:

   • Store the device in a dry, cool environment to prevent moisture absorption and degradation.
   • Follow the recommended storage temperature range to ensure long-term reliability.

6. Testing:

   • Use appropriate test equipment and procedures to verify the performance of the device.
   • Refer to the datasheet for specific test conditions and procedures.

7. Safety:

   • Ensure that all electrical connections are secure and insulated to prevent short circuits and electrical hazards.
   • Follow all relevant safety standards and regulations when designing and operating circuits containing this device.

(For reference only)