Details

---

BUY SDIN8DE4-64G https://www.utsource.net/itm/p/11246765.html

Parameter	Description	Value
Part Number	Full part number	SDIN8DE4-64G
Type	NAND Flash Memory	-
Density	Storage Capacity	64GB
Package	Package Type	BGA (Ball Grid Array)
Operating Voltage	Supply Voltage Range	1.8V ± 0.1V
Data I/O Width	Data Input/Output Bus Width	8 bits
Interface	Communication Protocol	Toggle Mode 2.0
Max Clock Frequency	Maximum Clock Frequency	200 MHz
Programming Time	Page Program Time (Typical)	500 μs
Erase Time	Block Erase Time (Typical)	1.5 ms
Endurance	Program/Erase Cycles (Minimum)	3,000 cycles
Retention	Data Retention at 25°C (Minimum)	10 years
Temperature Range	Operating Temperature Range	-40°C to +85°C
Storage Temperature	Non-Operating Temperature Range	-40°C to +125°C
Operating Humidity	Relative Humidity (Operating)	5% to 95% (Non-condensing)
Storage Humidity	Relative Humidity (Non-Operating)	5% to 95% (Non-condensing)
RoHS Compliance	RoHS Compliant	Yes
Lead-Free	Lead-Free Soldering	Yes

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage is within the specified range of 1.8V ± 0.1V.
   • Use a stable power source to avoid voltage fluctuations that can cause data corruption or damage.

2. Signal Integrity:

   • Use proper signal integrity practices to minimize noise and ensure reliable communication.
   • Terminate high-speed signals with appropriate resistors to prevent reflections.

3. Programming and Erasing:

   • Follow the programming and erasing procedures outlined in the device datasheet to avoid data corruption.
   • Use the correct command sequences for page programming and block erasing.

4. Temperature Considerations:

   • Operate the device within the specified temperature range to ensure reliable performance.
   • Store the device in a dry environment to prevent moisture damage.

5. Handling:

   • Handle the device with care to avoid physical damage.
   • Use ESD (Electrostatic Discharge) protection when handling the device to prevent damage from static electricity.

6. Firmware and Drivers:

   • Use the latest firmware and drivers provided by the manufacturer to ensure optimal performance and compatibility.
   • Refer to the device datasheet and application notes for detailed programming and configuration guidelines.

7. Testing:

   • Perform thorough testing of the device in your application to ensure it meets your performance requirements.
   • Use diagnostic tools and test patterns to verify the functionality of the memory.

8. Compliance:

   • Ensure that your design complies with all relevant regulations and standards, including RoHS and lead-free requirements.

(For reference only)