Details

---

BUY AT89S8253-24JU https://www.utsource.net/itm/p/11249037.html

Parameter	Description	Value/Range
Package Type	The type of package used for the component.	40-Pin PDIP (Plastic Dual In-line Package)
Operating Voltage	Supply voltage range for operation.	5V ± 10%
Clock Frequency	Maximum frequency of the clock input.	24 MHz
Flash Memory Size	Size of the on-chip Flash memory.	8 KB
EEPROM Size	Size of the on-chip EEPROM memory.	Not available
RAM Size	Size of the on-chip RAM.	256 bytes
I/O Lines	Number of programmable I/O lines.	32
Timers/Counters	Number of timer/counters included.	3
Interrupt Sources	Number of interrupt sources supported.	6 (including 2 external interrupts)
Watchdog Timer	Availability of a watchdog timer.	Yes
Power Consumption	Typical power consumption at maximum frequency and operating voltage.	90 mA @ 24 MHz, 5V
Operating Temperature	Range of temperatures under which the device can operate.	-40°C to +85°C

Instructions:

1. Power Supply: Ensure the supply voltage is within the specified range (5V ± 10%) to avoid damage.
2. Clock Configuration: Connect an external crystal or oscillator if required to achieve the desired clock frequency up to 24 MHz.
3. Programming: Use an ISP (In-System Programming) programmer to upload code to the Flash memory. Follow the programming protocol specified in the datasheet.
4. Reset Circuit: Design a reset circuit that provides a reliable reset signal to the RESET pin.
5. Decoupling Capacitors: Place decoupling capacitors close to the VCC and GND pins to stabilize the power supply and reduce noise.
6. Port Configuration: Configure the I/O ports as inputs or outputs based on your application needs using the internal pull-up resistors or external components.
7. Interrupt Handling: Implement interrupt routines for handling events from the interrupt sources such as timers and external interrupts.
8. Watchdog Timer: Enable and configure the watchdog timer to reset the microcontroller in case of software malfunctions.
9. Storage Conditions: Store the device in a moisture-free environment when not in use to prevent damage.

Note: For detailed information and advanced configurations, refer to the official AT89S8253-24JU datasheet provided by Atmel.

(For reference only)