Details

---

BUY MINISMDC150F/24-2 https://www.utsource.net/itm/p/11249312.html

Parameter	Description	Value
Part Number	Component Identifier	MINISMDC150F/24-2
Type	Component Type	Solid State Relay (SSR)
Input Voltage	Voltage Range for Input Control	3 to 32 VDC
Input Current	Maximum Current for Input Control	10 mA (Typical)
Output Voltage	Maximum Output Voltage Rating	600 VAC
Output Current	Continuous Output Current Rating	150 A
Isolation Voltage	Dielectric Strength Between Input and Output	5000 VAC (1 min)
Switching Time	Time to Switch from Off to On or On to Off	1 ms (Typical)
Leakage Current	Maximum Leakage Current at Output	100 μA (Max)
Operating Temperature	Temperature Range for Normal Operation	-40°C to +85°C
Storage Temperature	Temperature Range for Storage	-40°C to +125°C
Case Style	Physical Package Type	DIP-8
Mounting	Method of Mounting	Through-Hole
Weight	Weight of the Component	15 g

Instructions:

1. Power Supply:

   • Ensure the input voltage is within the specified range (3 to 32 VDC).
   • The output voltage should not exceed 600 VAC.

2. Current Handling:

   • Do not exceed the continuous output current rating of 150 A.
   • The input control current should be kept below 10 mA.

3. Isolation:

   • Maintain a minimum isolation voltage of 5000 VAC between the input and output circuits to ensure safe operation.

4. Temperature:

   • Operate the relay within the temperature range of -40°C to +85°C for optimal performance.
   • Store the relay in an environment with temperatures ranging from -40°C to +125°C.

5. Mounting:

   • Use through-hole mounting for secure installation.
   • Ensure proper heat dissipation if operating at high currents.

6. Testing:

   • Before installing, test the relay under controlled conditions to verify its functionality.
   • Check for any leakage current to ensure it does not exceed 100 μA.

7. Handling:

   • Handle the relay with care to avoid damage to the leads or the internal components.
   • Avoid exposure to excessive humidity and corrosive environments.

(For reference only)