Details

---

BUY PMBFJ309+215 https://www.utsource.net/itm/p/11249334.html

Parameter	Value	Unit
Part Number	PMBFJ309+215	-
Type	Tantalum Solid Capacitor	-
Capacitance	309	μF
Voltage Rating (DC)	215	V
Temperature Range	-55 to +85	°C
Tolerance	±20%	%
Case Size	C	-
Lead Spacing	5.00	mm
Height	6.80	mm
ESR (Equivalent Series Resistance)	0.25	Ω
ESL (Equivalent Series Inductance)	1.5	nH
Operating Temperature	-55 to +85	°C
Storage Temperature	-55 to +125	°C
Mounting Type	Through-Hole	-
RoHS Compliance	Yes	-

Instructions for Use:

1. Handling:

   • Handle the capacitor with care to avoid mechanical damage.
   • Do not apply excessive force when inserting or removing the leads.

2. Mounting:

   • Ensure the leads are properly aligned with the PCB holes before soldering.
   • Soldering temperature should not exceed 260°C for more than 10 seconds.
   • Allow the capacitor to cool naturally after soldering.

3. Polarity:

   • This is a polarized capacitor. Ensure the positive lead is connected to the positive terminal on the PCB.
   • The longer lead is typically the positive lead, and it may be marked on the capacitor body.

4. Environmental Conditions:

   • Operate the capacitor within the specified temperature range to ensure reliable performance.
   • Avoid exposing the capacitor to high humidity or corrosive environments.

5. Electrical Parameters:

   • Do not exceed the rated voltage and operating temperature.
   • Regularly monitor the ESR and capacitance values to ensure the capacitor is functioning correctly.

6. Storage:

   • Store the capacitor in a dry, cool place away from direct sunlight and sources of heat.
   • If stored for extended periods, check the electrical parameters before use.

7. Disposal:

   • Dispose of the capacitor in accordance with local environmental regulations.
   • Do not incinerate the capacitor as it may release harmful substances.

(For reference only)