Details

---

BUY FDS6675BZ https://www.utsource.net/itm/p/11249988.html

Parameter	Symbol	Min	Typical	Max	Unit	Conditions
Drain-Source Voltage	VDS	-	60	-	V	Continuous
Gate-Source Voltage	VGS	-12	-	12	V	Continuous
Continuous Drain Current	ID	-	-	3.8	A	TC = 25°C, VGS = 10V
Pulse Drain Current	ID(pulse)	-	-	7.6	A	tp = 10ms, Duty Cycle = 1%
Power Dissipation	PTOT	-	-	1.4	W	TC = 25°C
Junction Temperature	TJ	-	-	150	°C	-
Storage Temperature Range	TSTG	-55	-	150	°C	-
Total Gate Charge	QG	-	19	-	nC	VDS = 25V, VGS = 10V, ID = 1A
Input Capacitance	Ciss	-	1200	-	pF	VDS = 10V, f = 1MHz
Output Capacitance	Coss	-	300	-	pF	VDS = 10V, f = 1MHz
Reverse Transfer Capacitance	Crss	-	120	-	pF	VDS = 10V, f = 1MHz
On-State Resistance	RDS(on)	-	0.18	-	Ω	VGS = 10V, ID = 3.8A, TJ = 25°C
Gate-Threshold Voltage	VGS(th)	1.0	1.8	3.0	V	ID = 250μA, TJ = 25°C

Instructions for Use:

1. Mounting and Handling:

   • Handle the device with care to avoid damage to the leads and body.
   • Ensure proper mounting to the heat sink or PCB to maintain thermal performance.

2. Electrical Connections:

   • Connect the drain (D), source (S), and gate (G) terminals correctly.
   • Use appropriate wire gauges to handle the current ratings.

3. Thermal Management:

   • Ensure adequate cooling to keep the junction temperature within the specified range.
   • Use thermal paste between the device and the heat sink for better thermal conductivity.

4. Operating Conditions:

   • Do not exceed the maximum ratings for voltage, current, and power dissipation.
   • Operate the device within the recommended operating conditions to ensure reliability.

5. Storage and Transportation:

   • Store the device in a dry, cool place away from direct sunlight.
   • Follow ESD (Electrostatic Discharge) precautions during handling and installation.

6. Testing and Troubleshooting:

   • Use a multimeter or oscilloscope to verify the correct operation of the device.
   • Check for any physical damage or incorrect connections if the device fails to operate as expected.

(For reference only)