Details

---

BUY PCA82C250T/N4 https://www.utsource.net/itm/p/11250305.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	VCC	4.75	5	5.25	V
Operating Temperature	TA	-40		125	°C
Differential Input Voltage	Vid	-2		2	V
Common Mode Input Voltage	Vic	0		5	V
Output Current	IO	-100		100	mA	Short-circuit protection
Standby Current	ICC	0.1		1	mA	VCC = 5V, Standby mode
Quiescent Current	IQ	1		10	mA	VCC = 5V, Active mode
Data Rate	fD	0		1	Mbit/s	CAN protocol
Propagation Delay	tpd	15		25	ns	VCC = 5V
Skew	tskew	0		10	ns	VCC = 5V

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 4.75V to 5.25V.
   • Connect the ground (GND) pin to the system ground.

2. Temperature Range:

   • The device operates reliably within the temperature range of -40°C to 125°C.

3. Differential Input:

   • The differential input voltage (V_id) should not exceed ±2V to avoid damage to the device.

4. Common Mode Input:

   • The common mode input voltage (V_ic) should be between 0V and 5V.

5. Output Current:

   • The output current (I_O) should not exceed ±100mA to prevent short-circuit conditions.

6. Standby and Quiescent Current:

   • In standby mode, the current consumption (I_CC) is typically around 0.1mA.
   • In active mode, the quiescent current (I_Q) can range from 1mA to 10mA.

7. Data Rate:

   • The device supports data rates up to 1 Mbit/s, adhering to the CAN protocol.

8. Propagation Delay and Skew:

   • The propagation delay (t_pd) is typically between 15ns and 25ns.
   • The skew (t_skew) should not exceed 10ns to maintain signal integrity.

9. Installation:

   • Mount the PCA82C250T/N4 on a suitable PCB with appropriate thermal management to ensure reliable operation.

10. Testing:

    • Before integrating the device into a system, perform initial tests to verify proper functionality and adherence to the specified parameters.

(For reference only)